[PATCH v1 0/5] Add SPI Driver to HPE GXP Architecture

[nick.hawkins@xxxxxxx]

From: Nick Hawkins <nick.hawkins@xxxxxxx>

The GXP supports 3 separate SPI interfaces to accommodate the system
flash, core flash, and other functions. The SPI engine supports variable
clock frequency, selectable 3-byte or 4-byte addressing and a
configurable x1, x2, and x4 command/address/data modes. The memory
buffer for reading and writing ranges between 256 bytes and 8KB. This
driver supports access to the core flash and bios part.

Nick Hawkins (5):
  spi: spi-gxp: Add support for HPE GXP SoCs
  spi: dt-bindings: add documentation for hpe,gxp-spifi
  ARM: dts: hpe: Add spi driver node
  ARM: configs: multi_v7_defconfig: Enable HPE GXP SPI driver
  MAINTAINERS: add spi support to GXP

 .../bindings/spi/hpe,gxp-spifi.yaml           |  56 +++
 MAINTAINERS                                   |   2 +
 arch/arm/boot/dts/hpe-bmc-dl360gen10.dts      |  58 +++
 arch/arm/boot/dts/hpe-gxp.dtsi                |  21 +-
 arch/arm/configs/multi_v7_defconfig           |   1 +
 drivers/spi/Kconfig                           |   7 +
 drivers/spi/Makefile                          |   1 +
 drivers/spi/spi-gxp.c                         | 355 ++++++++++++++++++
 8 files changed, 500 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml
 create mode 100644 drivers/spi/spi-gxp.c

-- 
2.17.1