[PATCH 02/11] spi: spi-nxp-fspi: change the default lut index

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Haibo Chen <haibo.chen@xxxxxxx>

The fspi dynamic lut use the last lut for all IPS operations, the
imx8ulp only supports 15 luts, so change the last lut index from
31 to 15.

Signed-off-by: Han Xu <han.xu@xxxxxxx>
Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx>
---
 drivers/spi/spi-nxp-fspi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c
index b2cd8e06f374..10e71e55d21a 100644
--- a/drivers/spi/spi-nxp-fspi.c
+++ b/drivers/spi/spi-nxp-fspi.c
@@ -65,9 +65,9 @@
 /*
  * The driver only uses one single LUT entry, that is updated on
  * each call of exec_op(). Index 0 is preset at boot with a basic
- * read operation, so let's use the last entry (31).
+ * read operation, so let's use the last entry (15).
  */
-#define	SEQID_LUT			31
+#define	SEQID_LUT			15
 
 /* Registers used by the driver */
 #define FSPI_MCR0			0x00
-- 
2.25.1




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux