Re: [PATCH v2] spi: atmel: convert spi_atmel to json-schema

[<Sergiu.Moga@xxxxxxxxxxxxx>]

On 04.07.2022 15:52, Krzysztof Kozlowski wrote:
> On 04/07/2022 10:31, Sergiu Moga wrote:
>> Convert SPI DT binding for Atmel/Microchip SoCs to YAML schema.
>>
>> Signed-off-by: Sergiu Moga <sergiu.moga@xxxxxxxxxxxxx>
>> ---
>>
>> v1 -> v2:
>> - change subject headline prefix from "dt-bindings: spi" to "spi: atmel"
> Should be:
> spi: dt-bindings: atmel,spi: convert to json-schema
> (or to DT schema)
>
Noted.
>> - change maintainer
>> - kept the compatbile as items (instead of switching to enums) and at91rm9200
>> as fallback for sam9x60, since the evolution of IP's is incremental.
>> - removed unnecessay "cs-gpios" property and descriptions
>> - added min/max for fifo-size property.
>>
>>
>>   .../devicetree/bindings/spi/atmel,spi.yaml    | 77 +++++++++++++++++++
>>   .../devicetree/bindings/spi/spi_atmel.txt     | 36 ---------
>>   2 files changed, 77 insertions(+), 36 deletions(-)
>>   create mode 100644 Documentation/devicetree/bindings/spi/atmel,spi.yaml
>>   delete mode 100644 Documentation/devicetree/bindings/spi/spi_atmel.txt
>>
>> diff --git a/Documentation/devicetree/bindings/spi/atmel,spi.yaml b/Documentation/devicetree/bindings/spi/atmel,spi.yaml
>> new file mode 100644
>> index 000000000000..d627fc9315bc
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/spi/atmel,spi.yaml
>> @@ -0,0 +1,77 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/spi/atmel,spi.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Atmel SPI device
>> +
>> +maintainers:
>> +  - Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
>> +
>> +allOf:
>> +  - $ref: spi-controller.yaml#
>> +
>> +properties:
>> +  compatible:
>> +    oneOf:
>> +      - items:
>> +          - const: atmel,at91rm9200-spi
>> +      - items:
>> +          - const: microchip,sam9x60-spi
>> +          - const: atmel,at91rm9200-spi
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  clock-names:
>> +    contains:
>> +      const: spi_clk
>> +
>> +  clocks:
>> +    maxItems: 1
>> +
>> +  atmel,fifo-size:
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    description: |
>> +      Maximum number of data the RX and TX FIFOs can store for FIFO
>> +      capable SPI controllers.
>> +    minimum: 16
>> +    maximum: 32
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - interrupts
>> +  - clock-names
>> +  - clocks
> In properties it's clock-names followed by clocks, so better to keep
> same order here.
I am sorry, but I don't quite understand. Isn't it the same already (the 
order in properties and the order in required)?
>> +
>> +unevaluatedProperties: false
>> +
>
>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
>
> Best regards,
> Krzysztof

Regards,

     Sergiu