Re: [PATCH 4/4] spi: sun6i: add support for R329 SPI controllers

[Icenowy Zheng <icenowy@xxxxxxx>]

在 2022-04-22星期五的 18:59 -0500，Samuel Holland写道：
> On 4/22/22 10:56 AM, icenowy@xxxxxxxxxxx wrote:
> > From: Icenowy Zheng <icenowy@xxxxxxx>
> > 
> > R329 has two SPI controllers. One of it is quite similar to
> > previous
> > ones, but with internal clock divider removed; the other added MIPI
> > DBI
> > Type-C offload based on the first one.
> > 
> > Add basical support for these controllers. As we're not going to
> > support the DBI functionality now, just implement the two kinds of
> > controllers as the same.
> 
> I'm curious what speeds you were able to use SPI at. On D1, with
> effectively
> these same changes, I would always get corrupted data when reading
> from the
> onboard SPI NAND on the Nezha board. However, if I enabled the "new
> mode of
> sample timing" (bit 2 in GBL_CTL_REG), I got the correct data.

See 7.3.3.10 of R329_User_Manual_v1.0.pdf ? (named SPI sample mode and
Run Clock configuration)

> 
> Regards,
> Samuel