[PATCH v2 7/8] spi: mt65xx: Add kerneldoc for driver structures

[AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>]

One of the two structures was already partially documented, but not
in kerneldoc format: enhance readability by adding the missing
documentation bits and use kerneldoc.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---
 drivers/spi/spi-mt65xx.c | 39 ++++++++++++++++++++++++++++++++++-----
 1 file changed, 34 insertions(+), 5 deletions(-)

diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 111ce351359a..b1472556c5b0 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -110,20 +110,49 @@
 #define DMA_ADDR_EXT_BITS (36)
 #define DMA_ADDR_DEF_BITS (32)
 
+/**
+ * struct mtk_spi_compatible - device data structure
+ * @need_pad_sel:	Enable pad (pins) selection in SPI controller
+ * @must_tx:		Must explicitly send dummy TX bytes to do RX only transfer
+ * @enhance_timing:	Enable adjusting cfg register to enhance time accuracy
+ * @dma_ext:		DMA address extension supported
+ * @no_need_unprepare:	Don't unprepare the SPI clk during runtime
+ * @ipm_design:		Adjust/extend registers to support IPM design IP features
+ */
 struct mtk_spi_compatible {
 	bool need_pad_sel;
-	/* Must explicitly send dummy Tx bytes to do Rx only transfer */
 	bool must_tx;
-	/* some IC design adjust cfg register to enhance time accuracy */
 	bool enhance_timing;
-	/* some IC support DMA addr extension */
 	bool dma_ext;
-	/* some IC no need unprepare SPI clk */
 	bool no_need_unprepare;
-	/* IPM design adjust and extend register to support more features */
 	bool ipm_design;
 };
 
+/**
+ * struct mtk_spi - SPI driver instance
+ * @base:		Start address of the SPI controller registers
+ * @state:		SPI controller state
+ * @pad_num:		Number of pad_sel entries
+ * @pad_sel:		Groups of pins to select
+ * @parent_clk:		Parent of sel_clk
+ * @sel_clk:		SPI master mux clock
+ * @spi_clk:		Peripheral clock
+ * @spi_hclk:		AHB bus clock
+ * @cur_transfer:	Currently processed SPI transfer
+ * @xfer_len:		Number of bytes to transfer
+ * @num_xfered:		Number of transferred bytes
+ * @tx_sgl:		TX transfer scatterlist
+ * @rx_sgl:		RX transfer scatterlist
+ * @tx_sgl_len:		Size of TX DMA transfer
+ * @rx_sgl_len:		Size of RX DMA transfer
+ * @dev_comp:		Device data structure
+ * @spi_clk_hz:		Current SPI clock in Hz
+ * @spimem_done:	SPI-MEM operation completion
+ * @use_spimem:		Enables SPI-MEM
+ * @dev:		Device pointer
+ * @tx_dma:		DMA start for SPI-MEM TX
+ * @rx_dma:		DMA start for SPI-MEM RX
+ */
 struct mtk_spi {
 	void __iomem *base;
 	u32 state;
-- 
2.35.1