[PATCH 1/2] dt-bindings: spi: cadence-quadspi: Add reset-gpios for Xilinx Versal OSPI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add reset-gpios property to the properties list and marked as required
for Xilinx Versal OSPI compatible. This is used to perform the HW reset
for OSPI flash device.

Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
index 0a537fa3a641..56001eaf6365 100644
--- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
+++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
@@ -19,6 +19,7 @@ allOf:
     then:
       required:
         - power-domains
+        - reset-gpios
 
 properties:
   compatible:
@@ -78,6 +79,12 @@ properties:
   power-domains:
     maxItems: 1
 
+  reset-gpios:
+    description:
+      Contains a phandle and GPIO specifier for reset with the default active
+      state.
+    maxItems: 1
+
   resets:
     maxItems: 2
 
-- 
2.17.1




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux