[PATCH v2 5/6] mtd: spi-nor: core: Introduce SPI_NOR_SOFT_RESET flash_info fixup_flag

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The Soft Reset and Rescue Sequence Support is defined in BFPT_DWORD(16)
starting with JESD216A. The first version of SFDP, JESD216 (April 2011),
defines just the first 9 BFPT DWORDS, thus it does not contain information
about the Software Reset and Rescue Support. Since this support can not
be discovered by parsing the first SFDP version, introduce a flash_info
fixup_flag that will be used either by flashes that define
JESD216 (April 2011) or by flashes that do not define SFDP at all.
In case a flash defines BFPT_DWORD(16) but with wrong values, one should
instead use a post_bfpt() hook and set SNOR_F_SOFT_RESET.

Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
Reviewed-by: Pratyush Yadav <p.yadav@xxxxxx>
Link: https://lore.kernel.org/r/20220209133656.374903-7-tudor.ambarus@xxxxxxxxxxxxx
---
 drivers/mtd/spi-nor/core.c | 3 +++
 drivers/mtd/spi-nor/core.h | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index d7eebbd01122..7da8cf559dfd 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2417,6 +2417,9 @@ static void spi_nor_init_fixup_flags(struct spi_nor *nor)
 
 	if (fixup_flags & SPI_NOR_IO_MODE_EN_VOLATILE)
 		nor->flags |= SNOR_F_IO_MODE_EN_VOLATILE;
+
+	if (fixup_flags & SPI_NOR_SOFT_RESET)
+		nor->flags |= SNOR_F_SOFT_RESET;
 }
 
 /**
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 4508bbea5df1..fa716e467330 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -483,6 +483,8 @@ struct spi_nor_fixups {
  *                            memory size above 128Mib.
  *   SPI_NOR_IO_MODE_EN_VOLATILE: flash enables the best available I/O mode
  *                            via a volatile bit.
+ *   SPI_NOR_SOFT_RESET:      flash supports software reset enable, reset
+ *                            sequence.
  * @mfr_flags:      manufacturer private flags. Used in the manufacturer fixup
  *                  hooks to differentiate support between flashes of the same
  *                  manufacturer.
@@ -524,6 +526,7 @@ struct flash_info {
 	u8 fixup_flags;
 #define SPI_NOR_4B_OPCODES		BIT(0)
 #define SPI_NOR_IO_MODE_EN_VOLATILE	BIT(1)
+#define SPI_NOR_SOFT_RESET		BIT(2)
 
 	u8 mfr_flags;
 
-- 
2.25.1




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux