Re: [PATCH v2 06/10] spi: aspeed: Adjust direct mapping to device size

[Joel Stanley <joel@xxxxxxxxx>]

On Wed, 2 Mar 2022 at 17:31, Cédric Le Goater <clg@xxxxxxxx> wrote:
>
> The segment registers of the FMC/SPI controllers provide a way to
> configure the mapping window of the flash device contents on the AHB
> bus. Adjust this window to the size of the spi-mem mapping.
>
> Things get more complex with multiple devices. The driver needs to
> also adjust the window of the next device to make sure that there is
> no overlap, even if there is no available device. The proposal below
> is not perfect but it is covering all the cases we have seen on
> different boards with one and two devices on the same bus.
>
> Signed-off-by: Cédric Le Goater <clg@xxxxxxxx>

Reviewed-by: Joel Stanley <joel@xxxxxxxxx>

> ---
>  drivers/spi/spi-aspeed-smc.c | 88 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 88 insertions(+)
>
> diff --git a/drivers/spi/spi-aspeed-smc.c b/drivers/spi/spi-aspeed-smc.c
> index b4854b521477..974ab215ec34 100644
> --- a/drivers/spi/spi-aspeed-smc.c
> +++ b/drivers/spi/spi-aspeed-smc.c
> @@ -405,6 +405,92 @@ static int aspeed_spi_chip_set_default_window(struct aspeed_spi_chip *chip)
>         return chip->ahb_window_size ? 0 : -1;
>  }
>
> +static int aspeed_spi_set_window(struct aspeed_spi *aspi,
> +                                const struct aspeed_spi_window *win)
> +{
> +       u32 start = aspi->ahb_base_phy + win->offset;
> +       u32 end = start + win->size;
> +       void __iomem *seg_reg = aspi->regs + CE0_SEGMENT_ADDR_REG + win->cs * 4;
> +       u32 seg_val_backup = readl(seg_reg);
> +       u32 seg_val = aspi->data->segment_reg(aspi, start, end);
> +
> +       if (seg_val == seg_val_backup)
> +               return 0;
> +
> +       writel(seg_val, seg_reg);
> +
> +       /*
> +        * Restore initial value if something goes wrong else we could
> +        * loose access to the chip.
> +        */
> +       if (seg_val != readl(seg_reg)) {
> +               dev_err(aspi->dev, "CE%d invalid window [ 0x%.8x - 0x%.8x ] %dMB",
> +                       win->cs, start, end - 1, win->size >> 20);
> +               writel(seg_val_backup, seg_reg);
> +               return -EIO;
> +       }
> +
> +       if (win->size)
> +               dev_dbg(aspi->dev, "CE%d new window [ 0x%.8x - 0x%.8x ] %dMB",
> +                       win->cs, start, end - 1,  win->size >> 20);
> +       else
> +               dev_dbg(aspi->dev, "CE%d window closed", win->cs);
> +
> +       return 0;
> +}
> +
> +/*
> + * Yet to be done when possible :
> + * - Align mappings on flash size (we don't have the info)
> + * - ioremap each window, not strictly necessary since the overall window
> + *   is correct.
> + */
> +static int aspeed_spi_chip_adjust_window(struct aspeed_spi_chip *chip,
> +                                        u32 local_offset, u32 size)
> +{
> +       struct aspeed_spi *aspi = chip->aspi;
> +       struct aspeed_spi_window windows[ASPEED_SPI_MAX_NUM_CS] = { 0 };
> +       struct aspeed_spi_window *win = &windows[chip->cs];
> +       int ret;
> +
> +       aspeed_spi_get_windows(aspi, windows);
> +
> +       /* Adjust this chip window */
> +       win->offset += local_offset;
> +       win->size = size;
> +
> +       if (win->offset + win->size > aspi->ahb_window_size) {
> +               win->size = aspi->ahb_window_size - win->offset;
> +               dev_warn(aspi->dev, "CE%d window resized to %dMB", chip->cs, win->size >> 20);
> +       }
> +
> +       ret = aspeed_spi_set_window(aspi, win);
> +       if (ret)
> +               return ret;
> +
> +       /* Update chip mapping info */
> +       chip->ahb_base = aspi->ahb_base + win->offset;
> +       chip->ahb_window_size = win->size;
> +
> +       /*
> +        * Also adjust next chip window to make sure that it does not
> +        * overlap with the current window.
> +        */
> +       if (chip->cs < aspi->data->max_cs - 1) {
> +               struct aspeed_spi_window *next = &windows[chip->cs + 1];
> +
> +               /* Change offset and size to keep the same end address */
> +               if ((next->offset + next->size) > (win->offset + win->size))
> +                       next->size = (next->offset + next->size) - (win->offset + win->size);
> +               else
> +                       next->size = 0;
> +               next->offset = win->offset + win->size;
> +
> +               aspeed_spi_set_window(aspi, next);
> +       }
> +       return 0;
> +}
> +
>  static int aspeed_spi_dirmap_create(struct spi_mem_dirmap_desc *desc)
>  {
>         struct aspeed_spi *aspi = spi_controller_get_devdata(desc->mem->spi->master);
> @@ -419,6 +505,8 @@ static int aspeed_spi_dirmap_create(struct spi_mem_dirmap_desc *desc)
>         if (op->data.dir != SPI_MEM_DATA_IN)
>                 return -EOPNOTSUPP;
>
> +       aspeed_spi_chip_adjust_window(chip, desc->info.offset, desc->info.length);
> +
>         if (desc->info.length > chip->ahb_window_size)
>                 dev_warn(aspi->dev, "CE%d window (%dMB) too small for mapping",
>                          chip->cs, chip->ahb_window_size >> 20);
> --
> 2.34.1
>