Instead of creating an abstraction on top of PCI IDs, just use them directly.
The corresponding enum can be dropped.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/spi/spi-pxa2xx-pci.c | 161 ++++++++++++++++++-----------------
1 file changed, 83 insertions(+), 78 deletions(-)
diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c
index 5ac1487c9b3f..a0f24e811e9f 100644
--- a/drivers/spi/spi-pxa2xx-pci.c
+++ b/drivers/spi/spi-pxa2xx-pci.c
@@ -15,17 +15,17 @@
#include <linux/dmaengine.h>
#include <linux/platform_data/dma-dw.h>
-enum {
- PORT_QUARK_X1000,
- PORT_BYT,
- PORT_MRFLD,
- PORT_BSW0,
- PORT_BSW1,
- PORT_BSW2,
- PORT_CE4100,
- PORT_LPT0,
- PORT_LPT1,
-};
+#define PCI_DEVICE_ID_INTEL_QUARK_X1000 0x0935
+#define PCI_DEVICE_ID_INTEL_BYT 0x0f0e
+#define PCI_DEVICE_ID_INTEL_MRFLD 0x1194
+#define PCI_DEVICE_ID_INTEL_BSW0 0x228e
+#define PCI_DEVICE_ID_INTEL_BSW1 0x2290
+#define PCI_DEVICE_ID_INTEL_BSW2 0x22ac
+#define PCI_DEVICE_ID_INTEL_CE4100 0x2e6a
+#define PCI_DEVICE_ID_INTEL_LPT0_0 0x9c65
+#define PCI_DEVICE_ID_INTEL_LPT0_1 0x9c66
+#define PCI_DEVICE_ID_INTEL_LPT1_0 0x9ce5
+#define PCI_DEVICE_ID_INTEL_LPT1_1 0x9ce6
struct pxa_spi_info {
enum pxa_ssp_type type;
@@ -86,6 +86,49 @@ static int lpss_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
struct pci_dev *dma_dev;
int ret;
+ switch (dev->device) {
+ case PCI_DEVICE_ID_INTEL_BYT:
+ c->type = LPSS_BYT_SSP;
+ c->port_id = 0;
+ c->tx_param = &byt_tx_param;
+ c->rx_param = &byt_rx_param;
+ break;
+ case PCI_DEVICE_ID_INTEL_BSW0:
+ c->type = LPSS_BSW_SSP;
+ c->port_id = 0;
+ c->tx_param = &bsw0_tx_param;
+ c->rx_param = &bsw0_rx_param;
+ break;
+ case PCI_DEVICE_ID_INTEL_BSW1:
+ c->type = LPSS_BSW_SSP;
+ c->port_id = 1;
+ c->tx_param = &bsw1_tx_param;
+ c->rx_param = &bsw1_rx_param;
+ break;
+ case PCI_DEVICE_ID_INTEL_BSW2:
+ c->type = LPSS_BSW_SSP;
+ c->port_id = 2;
+ c->tx_param = &bsw2_tx_param;
+ c->rx_param = &bsw2_rx_param;
+ break;
+ case PCI_DEVICE_ID_INTEL_LPT0_0:
+ case PCI_DEVICE_ID_INTEL_LPT1_0:
+ c->type = LPSS_LPT_SSP;
+ c->port_id = 0;
+ c->tx_param = &lpt0_tx_param;
+ c->rx_param = &lpt0_rx_param;
+ break;
+ case PCI_DEVICE_ID_INTEL_LPT0_1:
+ case PCI_DEVICE_ID_INTEL_LPT1_1:
+ c->type = LPSS_LPT_SSP;
+ c->port_id = 1;
+ c->tx_param = &lpt1_tx_param;
+ c->rx_param = &lpt1_rx_param;
+ break;
+ default:
+ return -ENODEV;
+ }
+
c->num_chipselect = 1;
c->max_clk_rate = 50000000;
@@ -115,8 +158,13 @@ static int lpss_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
return 0;
}
+static struct pxa_spi_info lpss_info_config = {
+ .setup = lpss_spi_setup,
+};
+
static int ce4100_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
{
+ c->type = PXA25x_SSP;
c->port_id = dev->devfn;
c->num_chipselect = dev->devfn;
c->max_clk_rate = 3686400;
@@ -124,6 +172,10 @@ static int ce4100_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
return 0;
}
+static struct pxa_spi_info ce4100_info_config = {
+ .setup = ce4100_spi_setup,
+};
+
static int mrfld_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
{
struct dw_dma_slave *tx, *rx;
@@ -153,6 +205,7 @@ static int mrfld_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
return -ENODEV;
}
+ c->type = MRFLD_SSP;
c->max_clk_rate = 25000000;
dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(21, 0));
@@ -171,8 +224,13 @@ static int mrfld_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
return 0;
}
+static struct pxa_spi_info mrfld_info_config = {
+ .setup = mrfld_spi_setup,
+};
+
static int qrk_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
{
+ c->type = QUARK_X1000_SSP;
c->port_id = dev->devfn;
c->num_chipselect = 1;
c->max_clk_rate = 50000000;
@@ -180,61 +238,8 @@ static int qrk_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
return 0;
}
-static struct pxa_spi_info spi_info_configs[] = {
- [PORT_CE4100] = {
- .type = PXA25x_SSP,
- .setup = ce4100_spi_setup,
- },
- [PORT_BYT] = {
- .type = LPSS_BYT_SSP,
- .port_id = 0,
- .setup = lpss_spi_setup,
- .tx_param = &byt_tx_param,
- .rx_param = &byt_rx_param,
- },
- [PORT_BSW0] = {
- .type = LPSS_BSW_SSP,
- .port_id = 0,
- .setup = lpss_spi_setup,
- .tx_param = &bsw0_tx_param,
- .rx_param = &bsw0_rx_param,
- },
- [PORT_BSW1] = {
- .type = LPSS_BSW_SSP,
- .port_id = 1,
- .setup = lpss_spi_setup,
- .tx_param = &bsw1_tx_param,
- .rx_param = &bsw1_rx_param,
- },
- [PORT_BSW2] = {
- .type = LPSS_BSW_SSP,
- .port_id = 2,
- .setup = lpss_spi_setup,
- .tx_param = &bsw2_tx_param,
- .rx_param = &bsw2_rx_param,
- },
- [PORT_MRFLD] = {
- .type = MRFLD_SSP,
- .setup = mrfld_spi_setup,
- },
- [PORT_QUARK_X1000] = {
- .type = QUARK_X1000_SSP,
- .setup = qrk_spi_setup,
- },
- [PORT_LPT0] = {
- .type = LPSS_LPT_SSP,
- .port_id = 0,
- .setup = lpss_spi_setup,
- .tx_param = &lpt0_tx_param,
- .rx_param = &lpt0_rx_param,
- },
- [PORT_LPT1] = {
- .type = LPSS_LPT_SSP,
- .port_id = 1,
- .setup = lpss_spi_setup,
- .tx_param = &lpt1_tx_param,
- .rx_param = &lpt1_rx_param,
- },
+static struct pxa_spi_info qrk_info_config = {
+ .setup = qrk_spi_setup,
};
static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
@@ -256,7 +261,7 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
if (ret)
return ret;
- c = &spi_info_configs[ent->driver_data];
+ c = (struct pxa_spi_info *)ent->driver_data;
ret = c->setup(dev, c);
if (ret)
return ret;
@@ -320,17 +325,17 @@ static void pxa2xx_spi_pci_remove(struct pci_dev *dev)
}
static const struct pci_device_id pxa2xx_spi_pci_devices[] = {
- { PCI_VDEVICE(INTEL, 0x0935), PORT_QUARK_X1000 },
- { PCI_VDEVICE(INTEL, 0x0f0e), PORT_BYT },
- { PCI_VDEVICE(INTEL, 0x1194), PORT_MRFLD },
- { PCI_VDEVICE(INTEL, 0x228e), PORT_BSW0 },
- { PCI_VDEVICE(INTEL, 0x2290), PORT_BSW1 },
- { PCI_VDEVICE(INTEL, 0x22ac), PORT_BSW2 },
- { PCI_VDEVICE(INTEL, 0x2e6a), PORT_CE4100 },
- { PCI_VDEVICE(INTEL, 0x9c65), PORT_LPT0 },
- { PCI_VDEVICE(INTEL, 0x9c66), PORT_LPT1 },
- { PCI_VDEVICE(INTEL, 0x9ce5), PORT_LPT0 },
- { PCI_VDEVICE(INTEL, 0x9ce6), PORT_LPT1 },
+ { PCI_DEVICE_DATA(INTEL, QUARK_X1000, &qrk_info_config) },
+ { PCI_DEVICE_DATA(INTEL, BYT, &lpss_info_config) },
+ { PCI_DEVICE_DATA(INTEL, MRFLD, &mrfld_info_config) },
+ { PCI_DEVICE_DATA(INTEL, BSW0, &lpss_info_config) },
+ { PCI_DEVICE_DATA(INTEL, BSW1, &lpss_info_config) },
+ { PCI_DEVICE_DATA(INTEL, BSW2, &lpss_info_config) },
+ { PCI_DEVICE_DATA(INTEL, CE4100, &ce4100_info_config) },
+ { PCI_DEVICE_DATA(INTEL, LPT0_0, &lpss_info_config) },
+ { PCI_DEVICE_DATA(INTEL, LPT0_1, &lpss_info_config) },
+ { PCI_DEVICE_DATA(INTEL, LPT1_0, &lpss_info_config) },
+ { PCI_DEVICE_DATA(INTEL, LPT1_1, &lpss_info_config) },
{ }
};
MODULE_DEVICE_TABLE(pci, pxa2xx_spi_pci_devices);
--
2.34.1
[PATCH v1 07/11] spi: pxa2xx-pci: Replace enum with direct use of PCI IDs
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: [PATCH v1 07/11] spi: pxa2xx-pci: Replace enum with direct use of PCI IDs
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Date: Fri, 25 Feb 2022 19:23:46 +0200
- Cc: Daniel Mack <daniel@xxxxxxxxxx>, Haojian Zhuang <haojian.zhuang@xxxxxxxxx>, Robert Jarzmik <robert.jarzmik@xxxxxxx>, Mark Brown <broonie@xxxxxxxxxx>
- In-reply-to: <20220225172350.69797-1-andriy.shevchenko@linux.intel.com>
- References: <20220225172350.69797-1-andriy.shevchenko@linux.intel.com>
- References:
- [PATCH v1 01/11] spi: pxa2xx-pci: Refactor CE4100 to use ->setup()
- From: Andy Shevchenko
- [PATCH v1 01/11] spi: pxa2xx-pci: Refactor CE4100 to use ->setup()
- Prev by Date: [PATCH v1 08/11] spi: pxa2xx-pci: Drop unneeded checks in lpss_spi_setup()
- Next by Date: [PATCH v1 10/11] spi: pxa2xx-pci: Drop temporary storage use for a handful of members
- Previous by thread: [PATCH v1 08/11] spi: pxa2xx-pci: Drop unneeded checks in lpss_spi_setup()
- Next by thread: [PATCH v1 10/11] spi: pxa2xx-pci: Drop temporary storage use for a handful of members
- Index(es):
 |