Re: [PATCH v4 3/6] Documentation: DT bindings for Microsoft G6 Touch Digitizer

[Rob Herring <robh@xxxxxxxxxx>]

On Thu, 24 Feb 2022 16:59:33 -0800, Dmitry Antipov wrote:
> From: Dmitry Antipov <dmanti@xxxxxxxxxxxxx>
> 
> Documentation describes the required and optional properties for
> implementing Device Tree for a Microsoft G6 Touch Digitizer that
> supports HID over SPI Protocol 1.0 specification.
> 
> Signed-off-by: Dmitry Antipov <dmanti@xxxxxxxxxxxxx>
> ---
>  .../input/microsoft,g6-touch-digitizer.yaml   | 105 ++++++++++++++++++
>  1 file changed, 105 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/microsoft,g6-touch-digitizer.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/input/microsoft,g6-touch-digitizer.yaml:22:9: [warning] wrong indentation: expected 10 but found 8 (indentation)

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/input/microsoft,g6-touch-digitizer.example.dts:23.11-21: Warning (reg_format): /example-0/spi-hid-dev0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Documentation/devicetree/bindings/input/microsoft,g6-touch-digitizer.example.dts:21.22-37.11: Warning (unit_address_vs_reg): /example-0/spi-hid-dev0: node has a reg or ranges property, but no unit name
Documentation/devicetree/bindings/input/microsoft,g6-touch-digitizer.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/input/microsoft,g6-touch-digitizer.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/input/microsoft,g6-touch-digitizer.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/input/microsoft,g6-touch-digitizer.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/input/microsoft,g6-touch-digitizer.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format'

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1597405

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.