On 2/22/22 18:54, Marek Vasut wrote:
On 2/22/22 22:32, Dinh Nguyen wrote:
On 2/22/22 12:30, Marek Vasut wrote:
On 2/22/22 16:49, Dinh Nguyen wrote:
On 2/21/22 11:05, Marek Vasut wrote:
On 2/21/22 17:38, Dinh Nguyen wrote:
On 2/20/22 22:32, Marek Vasut wrote:
On SoCFPGA Gen5, DAC memcpy_fromio() in cqspi_direct_read_execute()
leads to data abort, disable DAC to avoid triggering it:
Unhandled fault: imprecise external abort (0x1406) at 0x0400d3e9
[0400d3e9] *pgd=00000000
Signed-off-by: Marek Vasut <marex@xxxxxxx>
Cc: Dinh Nguyen <dinguyen@xxxxxxxxxx>
Cc: Pratyush Yadav <p.yadav@xxxxxx>
---
drivers/spi/spi-cadence-quadspi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/spi/spi-cadence-quadspi.c
b/drivers/spi/spi-cadence-quadspi.c
index b808c94641fa6..65f2c2449be09 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -1870,7 +1870,7 @@ static const struct cqspi_driver_platdata
intel_lgm_qspi = {
};
static const struct cqspi_driver_platdata socfpga_qspi = {
- .quirks = CQSPI_NO_SUPPORT_WR_COMPLETION,
+ .quirks = CQSPI_DISABLE_DAC_MODE |
CQSPI_NO_SUPPORT_WR_COMPLETION,
};
static const struct cqspi_driver_platdata versal_ospi = {
Acked-by: Dinh Nguyen <dinguyen@xxxxxxxxxx>
Is this DAC really not working on socfpga gen5 or is there some
other issue ?
I don't know the answer to this question. What is the DAC in the
QSPI module and how do I go about testing it?
DAC = direct access.
How do you go about testing this -- compile kernel with/without this
patch, boot on SoCFPGA Gen5 with QSPI NOR attached, the kernel
crashes without this patch on imprecise external abort.
Hmm...I just tested v5.17-rc3 on a C5 board and QSPI looks to be
working fine:
[ 1.744489] spi-nor spi1.0: found n25q512ax3, expected mt25qu02g
[ 1.750534] dma-pl330 ffe01000.pdma: Reset Channel-0 CS-f FTC-40000
[ 1.756941] spi-nor spi1.0: n25q512ax3 (65536 Kbytes)
[ 1.762369] 2 fixed-partitions partitions found on MTD device
ff705000.spi.0
[ 1.769425] Creating 2 MTD partitions on "ff705000.spi.0":
[ 1.774925] 0x000000000000-0x000000800000 : "Flash 0 Raw Data"
[ 1.781942] 0x000000800000-0x000008000000 : "Flash 0 jffs2 Filesystem"
[ 1.788468] mtd: partition "Flash 0 jffs2 Filesystem" extends
beyond the end of device "ff705000.spi.0" -- size truncated to 0x3800000
I wonder if we might be missing some clock enable somewhere.
Can you mail me the whole boot log ? (I'm using u-boot 2022.01 btw.)
I tested with U-Boot 2022.01 as well:
=> run nfsboot_dinh
Kernel image @ 0x1000000 [ 0x000000 - 0x54edd0 ]
## Flattened Device Tree blob at 02000000
Booting using the fdt blob at 0x2000000
Loading Device Tree to 09ff8000, end 09fffeb1 ... OK
Starting kernel ...
Deasserting all peripheral resets
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.17.0-rc3 (dinguyen@linux-builds1)
(arm-linux-gnue abihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0,
GNU ld (GNU Binutils for U buntu) 2.30) #1 SMP Wed Feb 23 08:51:18 CST 2022
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7),
cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instructio n cache
[ 0.000000] OF: fdt: Machine model: Altera SOCFPGA Cyclone V SoC
Development Kit
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] HighMem [mem 0x0000000030000000-0x000000003fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000000000000-0x000000003fffffff]
[ 0.000000] percpu: Embedded 15 pages/cpu s29068 r8192 d24180 u61440
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608
[ 0.000000] Kernel command line: root=/dev/nfs rw
nfsroot=10.122.105.166:/hom e/dnguyen/rootfs_yocto,tcp ip=dhcp
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes, li near)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1026164K/1048576K available (9216K kernel code,
769K rwda ta, 1888K rodata, 1024K init, 139K bss, 22412K reserved, 0K
cma-reserved, 262144 K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] ftrace: allocating 30749 entries in 91 pages
[ 0.000000] ftrace: allocated 91 pages with 5 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay
is 10 jif fies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] L2C-310 erratum 769419 enabled
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 8 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 8 ways, 512 kB
[ 0.000000] L2C-310: CACHE_ID 0x410030c9, AUX_CTRL 0x76460001
[ 0.000000] random: get_random_bytes called from
start_kernel+0x528/0x6cc wit h crng_init=0
[ 0.000000] clocksource: timer1: mask: 0xffffffff max_cycles:
0xffffffff, max _idle_ns: 19112604467 ns
[ 0.000000] sched_clock: 32 bits at 100MHz, resolution 10ns, wraps
every 2147 4836475ns
[ 0.000017] Switching to timer-based delay loop, resolution 10ns
[ 0.000303] Console: colour dummy device 80x30
[ 0.000691] printk: console [tty0] enabled
[ 0.000734] Calibrating delay loop (skipped), value calculated using
timer fr equency.. 200.00 BogoMIPS (lpj=1000000)
[ 0.000765] pid_max: default: 32768 minimum: 301
[ 0.000894] Mount-cache hash table entries: 2048 (order: 1, 8192
bytes, linea r)
[ 0.000923] Mountpoint-cache hash table entries: 2048 (order: 1, 8192
bytes, linear)
[ 0.001517] CPU: Testing write buffer coherency: ok
[ 0.001575] CPU0: Spectre v2: using BPIALL workaround
[ 0.001761] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002324] cblist_init_generic: Setting adjustable number of
callback queues .
[ 0.002356] cblist_init_generic: Setting shift to 1 and lim to 1.
[ 0.002460] Setting up static identity map for 0x100000 - 0x100060
[ 0.002595] rcu: Hierarchical SRCU implementation.
[ 0.002912] smp: Bringing up secondary CPUs ...
[ 0.003517] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.003534] CPU1: Spectre v2: using BPIALL workaround
[ 0.003668] smp: Brought up 1 node, 2 CPUs
[ 0.003695] SMP: Total of 2 processors activated (400.00 BogoMIPS).
[ 0.003714] CPU: All CPU(s) started in SVC mode.
[ 0.004253] devtmpfs: initialized
[ 0.008177] VFP support v0.3: implementor 41 architecture 3 part 30
variant 9 rev 4
[ 0.008388] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, ma x_idle_ns: 19112604462750000 ns
[ 0.008426] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.009172] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.010014] DMA: preallocated 256 KiB pool for atomic coherent
allocations
[ 0.010998] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1
watchpoint registers.
[ 0.011030] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.029091] vgaarb: loaded
[ 0.029322] SCSI subsystem initialized
[ 0.029505] usbcore: registered new interface driver usbfs
[ 0.029563] usbcore: registered new interface driver hub
[ 0.029619] usbcore: registered new device driver usb
[ 0.029847] usb_phy_generic soc:usbphy: supply vcc not found, using
dummy reg ulator
[ 0.030261] pps_core: LinuxPPS API ver. 1 registered
[ 0.030285] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giome tti giometti@xxxxxxxx<mailto:giometti@xxxxxxxx>
[ 0.030319] PTP clock support registered
[ 0.030470] FPGA manager framework
[ 0.031309] clocksource: Switched to clocksource timer1
[ 0.065908] NET: Registered PF_INET protocol family
[ 0.066131] IP idents hash table entries: 16384 (order: 5, 131072
bytes, line ar)
[ 0.067138] tcp_listen_portaddr_hash hash table entries: 512 (order:
0, 6144 bytes, linear)
[ 0.067193] TCP established hash table entries: 8192 (order: 3, 32768
bytes, linear)
[ 0.067276] TCP bind hash table entries: 8192 (order: 4, 65536 bytes,
linear)
[ 0.067400] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.067523] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.067580] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes,
linear)
[ 0.067751] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.071713] RPC: Registered named UNIX socket transport module.
[ 0.071746] RPC: Registered udp transport module.
[ 0.071762] RPC: Registered tcp transport module.
[ 0.071776] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.071799] PCI: CLS 0 bytes, default 64
[ 0.725286] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7
counter s available
[ 0.726528] workingset: timestamp_bits=30 max_order=18 bucket_order=0
[ 0.732082] NFS: Registering the id_resolver key type
[ 0.732133] Key type id_resolver registered
[ 0.732151] Key type id_legacy registered
[ 0.732174] Installing knfsd (copyright (C) 1996
okir@xxxxxxxxxxxx<mailto:okir@xxxxxxxxxxxx>).
[ 0.732909] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.733097] jffs2: version 2.2. (NAND) (c) 2001-2006 Red Hat, Inc.
[ 0.733690] bounce: pool size: 64 pages
[ 0.733795] io scheduler mq-deadline registered
[ 0.733816] io scheduler kyber registered
[ 0.737748] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.738777] ffc02000.serial0: ttyS0 at MMIO 0xffc02000 (irq = 43,
base_baud = 6250000) is a 16550A
[ 1.377771] printk: console [ttyS0] enabled
[ 1.382603] ffc03000.serial1: ttyS1 at MMIO 0xffc03000 (irq = 44,
base_baud = 6250000) is a 16550A
[ 1.393068] brd: module loaded
[ 1.400992] loop: module loaded
[ 1.407175] CAN device driver interface
[ 1.411647] c_can_platform ffc00000.can: c_can_platform device
registered (re gs=(ptrval), irq=30)
[ 1.420796] socfpga-dwmac ff702000.ethernet: IRQ eth_wake_irq not found
[ 1.427438] socfpga-dwmac ff702000.ethernet: IRQ eth_lpi not found
[ 1.433718] socfpga-dwmac ff702000.ethernet: PTP uses main clock
[ 1.439902] socfpga-dwmac ff702000.ethernet: Version ID not available
[ 1.446361] socfpga-dwmac ff702000.ethernet: DWMAC1000
[ 1.451588] socfpga-dwmac ff702000.ethernet: DMA HW capability
register suppo rted
[ 1.459053] socfpga-dwmac ff702000.ethernet: RX Checksum Offload
Engine suppo rted
[ 1.466524] socfpga-dwmac ff702000.ethernet: COE Type 2
[ 1.471743] socfpga-dwmac ff702000.ethernet: TX Checksum insertion
supported
[ 1.478770] socfpga-dwmac ff702000.ethernet: Enhanced/Alternate
descriptors
[ 1.485724] socfpga-dwmac ff702000.ethernet: Extended descriptors not
support ed
[ 1.493023] socfpga-dwmac ff702000.ethernet: Ring mode enabled
[ 1.498848] socfpga-dwmac ff702000.ethernet: device MAC address
0a:70:a0:4c:e 4:6f
[ 1.514527] Micrel KSZ9021 Gigabit PHY stmmac-0:04: attached PHY
driver (mii_ bus:phy_addr=stmmac-0:04, irq=POLL)
[ 1.526181] dwc2 ffb40000.usb: supply vusb_d not found, using dummy
regulator
[ 1.533470] dwc2 ffb40000.usb: supply vusb_a not found, using dummy
regulator
[ 1.540831] dwc2 ffb40000.usb: EPs: 16, dedicated fifos, 8064 entries
in SPRA M
[ 1.548368] dwc2 ffb40000.usb: DWC OTG Controller
[ 1.553116] dwc2 ffb40000.usb: new USB bus registered, assigned bus
number 1
[ 1.560172] dwc2 ffb40000.usb: irq 45, io mem 0xffb40000
[ 1.566125] hub 1-0:1.0: USB hub found
[ 1.569911] hub 1-0:1.0: 1 port detected
[ 1.574627] usbcore: registered new interface driver usb-storage
[ 1.580807] i2c_dev: i2c /dev entries driver
[ 1.585982] Synopsys Designware Multimedia Card Interface Driver
[ 1.592409] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.598541] usbcore: registered new interface driver usbhid
[ 1.604129] usbhid: USB HID core driver
[ 1.609205] NET: Registered PF_INET6 protocol family
[ 1.615138] Segment Routing with IPv6
[ 1.618827] In-situ OAM (IOAM) with IPv6
[ 1.622844] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.629277] NET: Registered PF_PACKET protocol family
[ 1.634369] NET: Registered PF_KEY protocol family
[ 1.639152] can: controller area network core
[ 1.643568] NET: Registered PF_CAN protocol family
[ 1.648351] can: raw protocol
[ 1.651328] can: broadcast manager protocol
[ 1.655508] can: netlink gateway - max_hops=1
[ 1.659989] 8021q: 802.1Q VLAN Support v1.8
[ 1.664225] Key type dns_resolver registered
[ 1.668566] ThumbEE CPU extension supported.
[ 1.672846] Registering SWP/SWPB emulation handler
[ 1.681725] at24 0-0051: supply vcc not found, using dummy regulator
[ 1.689287] at24 0-0051: 4096 byte 24c32 EEPROM, writable, 32 bytes/write
[ 1.701762] rtc-ds1307 0-0068: registered as rtc0
[ 1.708271] rtc-ds1307 0-0068: setting system clock to
2018-03-17T01:43:02 UT C (1521250982)
[ 1.720866] dma-pl330 ffe01000.pdma: Loaded driver for PL330 DMAC-341330
[ 1.727602] dma-pl330 ffe01000.pdma: DBUFF-512x8bytes
Num_Chans-8 Num _Peri-32 Num_Events-8
[ 1.736593] spi-nor spi1.0: found n25q512ax3, expected mt25qu02g
[ 1.742662] dma-pl330 ffe01000.pdma: Reset Channel-0 CS-f FTC-40000
[ 1.749048] spi-nor spi1.0: n25q512ax3 (65536 Kbytes)
[ 1.754479] 2 fixed-partitions partitions found on MTD device
ff705000.spi.0
[ 1.761556] Creating 2 MTD partitions on "ff705000.spi.0":
[ 1.767035] 0x000000000000-0x000000800000 : "Flash 0 Raw Data"
[ 1.774038] 0x000000800000-0x000008000000 : "Flash 0 jffs2 Filesystem"
[ 1.780562] mtd: partition "Flash 0 jffs2 Filesystem" extends beyond
the end of device "ff705000.spi.0" -- size truncated to 0x3800000
[ 1.794865] dw_mmc ff704000.dwmmc0: IDMAC supports 32-bit address mode.
[ 1.801560] dw_mmc ff704000.dwmmc0: Using internal DMA controller.
[ 1.807737] dw_mmc ff704000.dwmmc0: Version ID is 240a
[ 1.812917] dw_mmc ff704000.dwmmc0: DW MMC controller at irq 38,32
bit host d ata width,1024 deep fifo
[ 1.822428] dw_mmc ff704000.dwmmc0: Got CD GPIO
[ 1.827005] mmc_host mmc0: card is polling.
[ 1.841337] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req
400000Hz , actual 396825HZ div = 63)
[ 1.865228] socfpga-dwmac ff702000.ethernet eth0: PHY [stmmac-0:04]
driver [M icrel KSZ9021 Gigabit PHY] (irq=POLL)
[ 1.875810] socfpga-dwmac ff702000.ethernet eth0: Register
MEM_TYPE_PAGE_POOL RxQ-0
[ 1.886679] socfpga-dwmac ff702000.ethernet eth0: No Safety Features
support found
[ 1.897468] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req
50000000 Hz, actual 50000000HZ div = 0)
[ 1.904448] socfpga-dwmac ff702000.ethernet eth0: registered PTP clock
[ 1.907277] mmc0: new high speed SDHC card at address 0001
[ 1.919446] socfpga-dwmac ff702000.ethernet eth0: configuring for
phy/rgmii l ink mode
[ 1.919714] mmcblk0: mmc0:0001 SD8GB 7.24 GiB
[ 1.933945] mmcblk0: p1 p2 p3
[ 6.072231] socfpga-dwmac ff702000.ethernet eth0: Link is Up -
1Gbps/Full - f low control rx/tx
[ 6.080856] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.131319] Sending DHCP requests .., OK
[ 9.375268] IP-Config: Got DHCP answer from 10.122.105.2, my address
is 10.12 2.105.45
[ 9.383105] IP-Config: Complete:
[ 9.386328] device=eth0, hwaddr=0a:70:a0:4c:e4:6f,
ipaddr=10.122.105.45, mask=255.255.255.0, gw=10.122.105.1
[ 9.396572] host=10.122.105.45, domain=an.intel.com,
nis-domain=(none)
[ 9.403526] bootserver=10.122.105.30, rootserver=10.122.105.166,
rootpat h=
[ 9.403536] nameserver0=10.248.2.1, nameserver1=10.2.71.6,
nameserver2=1 0.31.40.4
[ 9.419206] dw-apb-uart ffc02000.serial0: forbid DMA for kernel console
[ 9.440415] VFS: Mounted root (nfs filesystem) on device 0:13.
[ 9.446908] devtmpfs: mounted
[ 9.452213] Freeing unused kernel image (initmem) memory: 1024K
[ 9.491560] Run /sbin/init as init process
INIT: version 2.88 booting
[ 9.707166] random: fast init done
Starting Bootlog daemon: bootlogd.
mount: mounting 10.122.105.166:/home/dnguyen/rootfs_yocto on / failed:
Invalid a rgument
Starting portmap daemon...
INIT: Entering runlevel: 5
Starting OpenBSD Secure Shell server: sshd
[ 10.594905] random: sshd: uninitialized urandom read (32 bytes read)
done.
creating NFS state directory: done
starting 8 nfsd kernel threads: rpc.nfsd: unable to resolve ANYADDR:nfs
to inet address: Servname not supported for ai_socktype
rpc.nfsd: unable to set any sockets for nfsd
done
starting mountd: done
starting statd: done
Starting system log daemon...start-stop-daemon: can't execute
'/sbin/syslogd': N o such file or directory
1
Starting kernel log daemon...start-stop-daemon: can't execute
'/sbin/klogd': No such file or directory
1
Starting Lighttpd Web Server: [ 10.978345] random: lighttpd:
uninitialized ura ndom read (4096 bytes read)
lighttpd.
Stopping Bootlog daemon: bootlogd.
Poky 8.0 (Yocto Project 1.3 Reference Distro) 1.3 socfpga_cyclone5 ttyS0
socfpga_cyclone5 login: root
login[158]: root login on `ttyS0'
root@socfpga_cyclone5:~#
