Extend the driver for the AST2400 SPI Flash Controller (SPI). This controller has a slightly different interface which requires adaptation of the 4B handling. Summary of features : . host Firmware . 1 chip select pin (CE0) . slightly different register set, between AST2500 and the legacy controller . no segment registers . single, dual mode. Signed-off-by: Cédric Le Goater <clg@xxxxxxxx> --- drivers/spi/spi-aspeed-smc.c | 33 ++++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-aspeed-smc.c b/drivers/spi/spi-aspeed-smc.c index c6ac3253d7d5..e44e80bab50f 100644 --- a/drivers/spi/spi-aspeed-smc.c +++ b/drivers/spi/spi-aspeed-smc.c @@ -32,6 +32,7 @@ #define CTRL_IO_DUAL_DATA BIT(29) #define CTRL_IO_QUAD_DATA BIT(30) #define CTRL_COMMAND_SHIFT 16 +#define CTRL_IO_ADDRESS_4B BIT(13) /* AST2400 SPI only */ #define CTRL_IO_DUMMY_SET(dummy) \ (((((dummy) >> 2) & 0x1) << 14) | (((dummy) & 0x3) << 6)) #define CTRL_CE_STOP_ACTIVE BIT(2) @@ -293,6 +294,8 @@ static bool aspeed_spi_supports_op(struct spi_mem *mem, const struct spi_mem_op return true; } +static const struct aspeed_spi_data ast2400_spi_data; + static int do_aspeed_spi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) { struct aspeed_spi *aspi = spi_controller_get_devdata(mem->spi->master); @@ -322,6 +325,9 @@ static int do_aspeed_spi_exec_op(struct spi_mem *mem, const struct spi_mem_op *o addr_mode |= (0x11 << chip->cs); else addr_mode &= ~(0x11 << chip->cs); + + if (op->addr.nbytes == 4 && chip->aspi->data == &ast2400_spi_data) + ctl_val |= CTRL_IO_ADDRESS_4B; } if (op->dummy.buswidth && op->dummy.nbytes) @@ -413,7 +419,13 @@ static int aspeed_spi_chip_set_default_window(struct aspeed_spi_chip *chip) struct aspeed_spi_window windows[ASPEED_SPI_MAX_NUM_CS] = { 0 }; struct aspeed_spi_window *win = &windows[chip->cs]; - aspeed_spi_get_windows(aspi, windows); + /* No segment registers for the AST2400 SPI controller */ + if (aspi->data == &ast2400_spi_data) { + win->offset = 0; + win->size = aspi->ahb_window_size; + } else { + aspeed_spi_get_windows(aspi, windows); + } chip->ahb_base = aspi->ahb_base + win->offset; chip->ahb_window_size = win->size; @@ -476,6 +488,10 @@ static int aspeed_spi_chip_adjust_window(struct aspeed_spi_chip *chip, struct aspeed_spi_window *win = &windows[chip->cs]; int ret; + /* No segment registers for the AST2400 SPI controller */ + if (aspi->data == &ast2400_spi_data) + return 0; + /* * Due to an HW issue on the AST2500 SPI controller, the CE0 * window size should be smaller than the maximum 128MB. @@ -560,6 +576,12 @@ static int aspeed_spi_dirmap_create(struct spi_mem_dirmap_desc *desc) else addr_mode &= ~(0x11 << chip->cs); writel(addr_mode, aspi->regs + CE_CTRL_REG); + + /* AST2400 SPI controller sets 4BYTE address mode in + * CE0 Control Register + */ + if (op->addr.nbytes == 4 && chip->aspi->data == &ast2400_spi_data) + ctl_val |= CTRL_IO_ADDRESS_4B; } /* READ mode is the controller default setting */ @@ -860,6 +882,14 @@ static const struct aspeed_spi_data ast2400_fmc_data = { .segment_reg = aspeed_spi_segment_reg, }; +static const struct aspeed_spi_data ast2400_spi_data = { + .max_cs = 1, + .hastype = false, + .we0 = 0, + .ctl0 = 0x04, + /* No segment registers */ +}; + static const struct aspeed_spi_data ast2500_fmc_data = { .max_cs = 3, .hastype = true, @@ -904,6 +934,7 @@ static const struct aspeed_spi_data ast2600_spi_data = { static const struct of_device_id aspeed_spi_matches[] = { { .compatible = "aspeed,ast2400-fmc", .data = &ast2400_fmc_data }, + { .compatible = "aspeed,ast2400-spi", .data = &ast2400_spi_data }, { .compatible = "aspeed,ast2500-fmc", .data = &ast2500_fmc_data }, { .compatible = "aspeed,ast2500-spi", .data = &ast2500_spi_data }, { .compatible = "aspeed,ast2600-fmc", .data = &ast2600_fmc_data }, -- 2.34.1