[PATCH] spi: bcm-qspi: check for valid cs before applying chip select

[Kamal Dasu <kdasu.kdev@xxxxxxxxx>]

Apply only valid chip select value. This change fixes case where chip
select is set to initial value of '-1' during probe and  PM supend and
subsequent resume can try to use the value with undefined behaviour.
Also in case where gpio based chip select, the check in
bcm_qspi_chip_select() shall prevent undefined behaviour on resume.

Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
---
 drivers/spi/spi-bcm-qspi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index c9a769b8594b..86c76211b3d3 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -585,7 +585,7 @@ static void bcm_qspi_chip_select(struct bcm_qspi *qspi, int cs)
 	u32 rd = 0;
 	u32 wr = 0;
 
-	if (qspi->base[CHIP_SELECT]) {
+	if (cs >= 0 && qspi->base[CHIP_SELECT]) {
 		rd = bcm_qspi_read(qspi, CHIP_SELECT, 0);
 		wr = (rd & ~0xff) | (1 << cs);
 		if (rd == wr)
-- 
2.17.1