Re: [PATCH v4 5/9] platform/x86: i2c-multi-instantiate: Rename it for a generic bus driver name

[Hans de Goede <hdegoede@xxxxxxxxxx>]

Hi,

On 1/20/22 14:43, Stefan Binding wrote:
> From: Lucas Tanure <tanureal@xxxxxxxxxxxxxxxxxxxxx>
> 
> Rename I2C multi instantiate driver to bus-multi-instantiate for
> upcoming addition of SPI support
> 
> Signed-off-by: Lucas Tanure <tanureal@xxxxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Stefan Binding <sbinding@xxxxxxxxxxxxxxxxxxxxx>

Thanks, patch looks good to me:

Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>

Regards,

Hans


> ---
>  MAINTAINERS                                   |  4 +-
>  drivers/acpi/scan.c                           |  2 +-
>  drivers/platform/x86/Kconfig                  |  4 +-
>  drivers/platform/x86/Makefile                 |  2 +-
>  ...-instantiate.c => bus-multi-instantiate.c} | 89 +++++++++----------
>  5 files changed, 50 insertions(+), 51 deletions(-)
>  rename drivers/platform/x86/{i2c-multi-instantiate.c => bus-multi-instantiate.c} (53%)
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 4e828542b089..4a7e3cff9245 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -388,11 +388,11 @@ L:	linux-arm-kernel@xxxxxxxxxxxxxxxxxxx (moderated for non-subscribers)
>  S:	Maintained
>  F:	drivers/acpi/arm64
>  
> -ACPI I2C MULTI INSTANTIATE DRIVER
> +ACPI BUS MULTI INSTANTIATE DRIVER
>  M:	Hans de Goede <hdegoede@xxxxxxxxxx>
>  L:	platform-driver-x86@xxxxxxxxxxxxxxx
>  S:	Maintained
> -F:	drivers/platform/x86/i2c-multi-instantiate.c
> +F:	drivers/platform/x86/bus-multi-instantiate.c
>  
>  ACPI PCC(Platform Communication Channel) MAILBOX DRIVER
>  M:	Sudeep Holla <sudeep.holla@xxxxxxx>
> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> index 1331756d4cfc..e4fda14572e7 100644
> --- a/drivers/acpi/scan.c
> +++ b/drivers/acpi/scan.c
> @@ -1738,7 +1738,7 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
>  	 * must be instantiated for each, each with its own i2c_device_id.
>  	 * Normally we only instantiate an i2c-client for the first resource,
>  	 * using the ACPI HID as id. These special cases are handled by the
> -	 * drivers/platform/x86/i2c-multi-instantiate.c driver, which knows
> +	 * drivers/platform/x86/bus-multi-instantiate.c driver, which knows
>  	 * which i2c_device_id to use for each resource.
>  	 */
>  		{"BSG1160", },
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index 24deeeb29af2..616da06aa6b9 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -990,7 +990,7 @@ config TOPSTAR_LAPTOP
>  
>  	  If you have a Topstar laptop, say Y or M here.
>  
> -config I2C_MULTI_INSTANTIATE
> +config BUS_MULTI_INSTANTIATE
>  	tristate "I2C multi instantiate pseudo device driver"
>  	depends on I2C && ACPI
>  	help
> @@ -999,7 +999,7 @@ config I2C_MULTI_INSTANTIATE
>  	  for each device in the firmware-node.
>  
>  	  To compile this driver as a module, choose M here: the module
> -	  will be called i2c-multi-instantiate.
> +	  will be called bus-multi-instantiate.
>  
>  config MLX_PLATFORM
>  	tristate "Mellanox Technologies platform support"
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index c12a9b044fd8..b5852e3fbab1 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -110,7 +110,7 @@ obj-$(CONFIG_TOPSTAR_LAPTOP)	+= topstar-laptop.o
>  
>  # Platform drivers
>  obj-$(CONFIG_FW_ATTR_CLASS)		+= firmware_attributes_class.o
> -obj-$(CONFIG_I2C_MULTI_INSTANTIATE)	+= i2c-multi-instantiate.o
> +obj-$(CONFIG_BUS_MULTI_INSTANTIATE)	+= bus-multi-instantiate.o
>  obj-$(CONFIG_MLX_PLATFORM)		+= mlx-platform.o
>  obj-$(CONFIG_TOUCHSCREEN_DMI)		+= touchscreen_dmi.o
>  obj-$(CONFIG_WIRELESS_HOTKEY)		+= wireless-hotkey.o
> diff --git a/drivers/platform/x86/i2c-multi-instantiate.c b/drivers/platform/x86/bus-multi-instantiate.c
> similarity index 53%
> rename from drivers/platform/x86/i2c-multi-instantiate.c
> rename to drivers/platform/x86/bus-multi-instantiate.c
> index 4956a1df5b90..982dfecfd27c 100644
> --- a/drivers/platform/x86/i2c-multi-instantiate.c
> +++ b/drivers/platform/x86/bus-multi-instantiate.c
> @@ -1,6 +1,6 @@
>  // SPDX-License-Identifier: GPL-2.0+
>  /*
> - * I2C multi-instantiate driver, pseudo driver to instantiate multiple
> + * Bus multi-instantiate driver, pseudo driver to instantiate multiple
>   * i2c-clients from a single fwnode.
>   *
>   * Copyright 2018 Hans de Goede <hdegoede@xxxxxxxxxx>
> @@ -21,29 +21,29 @@
>  #define IRQ_RESOURCE_GPIO	1
>  #define IRQ_RESOURCE_APIC	2
>  
> -struct i2c_inst_data {
> +struct bmi_instance {
>  	const char *type;
>  	unsigned int flags;
>  	int irq_idx;
>  };
>  
> -struct i2c_multi_inst_data {
> -	int num_clients;
> -	struct i2c_client *clients[];
> +struct bmi {
> +	int i2c_num;
> +	struct i2c_client *i2c_devs[];
>  };
>  
> -static int i2c_multi_inst_probe(struct platform_device *pdev)
> +static int bmi_probe(struct platform_device *pdev)
>  {
> -	struct i2c_multi_inst_data *multi;
> -	const struct i2c_inst_data *inst_data;
>  	struct i2c_board_info board_info = {};
> +	const struct bmi_instance *inst;
>  	struct device *dev = &pdev->dev;
>  	struct acpi_device *adev;
> +	struct bmi *bmi;
>  	char name[32];
>  	int i, ret;
>  
> -	inst_data = device_get_match_data(dev);
> -	if (!inst_data) {
> +	inst = device_get_match_data(dev);
> +	if (!inst) {
>  		dev_err(dev, "Error ACPI match data is missing\n");
>  		return -ENODEV;
>  	}
> @@ -55,33 +55,32 @@ static int i2c_multi_inst_probe(struct platform_device *pdev)
>  	if (ret < 0)
>  		return ret;
>  
> -	multi = devm_kmalloc(dev, struct_size(multi, clients, ret), GFP_KERNEL);
> -	if (!multi)
> +	bmi = devm_kmalloc(dev, struct_size(bmi, i2c_devs, ret), GFP_KERNEL);
> +	if (!bmi)
>  		return -ENOMEM;
>  
> -	multi->num_clients = ret;
> +	bmi->i2c_num = ret;
>  
> -	for (i = 0; i < multi->num_clients && inst_data[i].type; i++) {
> +	for (i = 0; i < bmi->i2c_num && inst[i].type; i++) {
>  		memset(&board_info, 0, sizeof(board_info));
> -		strlcpy(board_info.type, inst_data[i].type, I2C_NAME_SIZE);
> -		snprintf(name, sizeof(name), "%s-%s.%d", dev_name(dev),
> -			 inst_data[i].type, i);
> +		strlcpy(board_info.type, inst[i].type, I2C_NAME_SIZE);
> +		snprintf(name, sizeof(name), "%s-%s.%d", dev_name(dev), inst[i].type, i);
>  		board_info.dev_name = name;
> -		switch (inst_data[i].flags & IRQ_RESOURCE_TYPE) {
> +		switch (inst[i].flags & IRQ_RESOURCE_TYPE) {
>  		case IRQ_RESOURCE_GPIO:
> -			ret = acpi_dev_gpio_irq_get(adev, inst_data[i].irq_idx);
> +			ret = acpi_dev_gpio_irq_get(adev, inst[i].irq_idx);
>  			if (ret < 0) {
>  				dev_err(dev, "Error requesting irq at index %d: %d\n",
> -					inst_data[i].irq_idx, ret);
> +						inst[i].irq_idx, ret);
>  				goto error;
>  			}
>  			board_info.irq = ret;
>  			break;
>  		case IRQ_RESOURCE_APIC:
> -			ret = platform_get_irq(pdev, inst_data[i].irq_idx);
> +			ret = platform_get_irq(pdev, inst[i].irq_idx);
>  			if (ret < 0) {
>  				dev_dbg(dev, "Error requesting irq at index %d: %d\n",
> -					inst_data[i].irq_idx, ret);
> +					inst[i].irq_idx, ret);
>  				goto error;
>  			}
>  			board_info.irq = ret;
> @@ -90,48 +89,48 @@ static int i2c_multi_inst_probe(struct platform_device *pdev)
>  			board_info.irq = 0;
>  			break;
>  		}
> -		multi->clients[i] = i2c_acpi_new_device(dev, i, &board_info);
> -		if (IS_ERR(multi->clients[i])) {
> -			ret = dev_err_probe(dev, PTR_ERR(multi->clients[i]),
> +		bmi->i2c_devs[i] = i2c_acpi_new_device(dev, i, &board_info);
> +		if (IS_ERR(bmi->i2c_devs[i])) {
> +			ret = dev_err_probe(dev, PTR_ERR(bmi->i2c_devs[i]),
>  					    "Error creating i2c-client, idx %d\n", i);
>  			goto error;
>  		}
>  	}
> -	if (i < multi->num_clients) {
> +	if (i < bmi->i2c_num) {
>  		dev_err(dev, "Error finding driver, idx %d\n", i);
>  		ret = -ENODEV;
>  		goto error;
>  	}
>  
> -	platform_set_drvdata(pdev, multi);
> +	platform_set_drvdata(pdev, bmi);
>  	return 0;
>  
>  error:
>  	while (--i >= 0)
> -		i2c_unregister_device(multi->clients[i]);
> +		i2c_unregister_device(bmi->i2c_devs[i]);
>  
>  	return ret;
>  }
>  
> -static int i2c_multi_inst_remove(struct platform_device *pdev)
> +static int bmi_remove(struct platform_device *pdev)
>  {
> -	struct i2c_multi_inst_data *multi = platform_get_drvdata(pdev);
> +	struct bmi *bmi = platform_get_drvdata(pdev);
>  	int i;
>  
> -	for (i = 0; i < multi->num_clients; i++)
> -		i2c_unregister_device(multi->clients[i]);
> +	for (i = 0; i < bmi->i2c_num; i++)
> +		i2c_unregister_device(bmi->i2c_devs[i]);
>  
>  	return 0;
>  }
>  
> -static const struct i2c_inst_data bsg1160_data[]  = {
> +static const struct bmi_instance bsg1160_data[]  = {
>  	{ "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
>  	{ "bmc150_magn" },
>  	{ "bmg160" },
>  	{}
>  };
>  
> -static const struct i2c_inst_data bsg2150_data[]  = {
> +static const struct bmi_instance bsg2150_data[]  = {
>  	{ "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
>  	{ "bmc150_magn" },
>  	/* The resources describe a 3th client, but it is not really there. */
> @@ -139,7 +138,7 @@ static const struct i2c_inst_data bsg2150_data[]  = {
>  	{}
>  };
>  
> -static const struct i2c_inst_data int3515_data[]  = {
> +static const struct bmi_instance int3515_data[]  = {
>  	{ "tps6598x", IRQ_RESOURCE_APIC, 0 },
>  	{ "tps6598x", IRQ_RESOURCE_APIC, 1 },
>  	{ "tps6598x", IRQ_RESOURCE_APIC, 2 },
> @@ -148,27 +147,27 @@ static const struct i2c_inst_data int3515_data[]  = {
>  };
>  
>  /*
> - * Note new device-ids must also be added to i2c_multi_instantiate_ids in
> + * Note new device-ids must also be added to bus_multi_instantiate_ids in
>   * drivers/acpi/scan.c: acpi_device_enumeration_by_parent().
>   */
> -static const struct acpi_device_id i2c_multi_inst_acpi_ids[] = {
> +static const struct acpi_device_id bmi_acpi_ids[] = {
>  	{ "BSG1160", (unsigned long)bsg1160_data },
>  	{ "BSG2150", (unsigned long)bsg2150_data },
>  	{ "INT3515", (unsigned long)int3515_data },
>  	{ }
>  };
> -MODULE_DEVICE_TABLE(acpi, i2c_multi_inst_acpi_ids);
> +MODULE_DEVICE_TABLE(acpi, bmi_acpi_ids);
>  
> -static struct platform_driver i2c_multi_inst_driver = {
> +static struct platform_driver bmi_driver = {
>  	.driver	= {
> -		.name = "I2C multi instantiate pseudo device driver",
> -		.acpi_match_table = i2c_multi_inst_acpi_ids,
> +		.name = "Bus multi instantiate pseudo device driver",
> +		.acpi_match_table = bmi_acpi_ids,
>  	},
> -	.probe = i2c_multi_inst_probe,
> -	.remove = i2c_multi_inst_remove,
> +	.probe = bmi_probe,
> +	.remove = bmi_remove,
>  };
> -module_platform_driver(i2c_multi_inst_driver);
> +module_platform_driver(bmi_driver);
>  
> -MODULE_DESCRIPTION("I2C multi instantiate pseudo device driver");
> +MODULE_DESCRIPTION("Bus multi instantiate pseudo device driver");
>  MODULE_AUTHOR("Hans de Goede <hdegoede@xxxxxxxxxx>");
>  MODULE_LICENSE("GPL");
>