On Tue, 18 Jan 2022 at 13:11, Linus Walleij <linus.walleij@xxxxxxxxxx> wrote:
>
> Convert the S3C64xx SPI host to use GPIO descriptors.
>
> Provide GPIO descriptor tables for the one user with CS
> 0 and 1.
>
> Cc: linux-samsung-soc@xxxxxxxxxxxxxxx
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
> Cc: Sylwester Nawrocki <snawrocki@xxxxxxxxxx>
> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> ---
> ChangeLog v1-v2:
> - Split off code cleaning to separate patches
> ---
> arch/arm/mach-s3c/mach-crag6410-module.c | 13 ------
> arch/arm/mach-s3c/mach-crag6410.c | 11 +++++
> drivers/spi/spi-s3c64xx.c | 50 +++++------------------
> include/linux/platform_data/spi-s3c64xx.h | 4 +-
> 4 files changed, 23 insertions(+), 55 deletions(-)
>
> diff --git a/arch/arm/mach-s3c/mach-crag6410-module.c b/arch/arm/mach-s3c/mach-crag6410-module.c
> index 407ad493493e..5d1d4b67a4b7 100644
> --- a/arch/arm/mach-s3c/mach-crag6410-module.c
> +++ b/arch/arm/mach-s3c/mach-crag6410-module.c
> @@ -32,10 +32,6 @@
>
> #include "crag6410.h"
>
> -static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
> - .line = S3C64XX_GPC(3),
> -};
> -
> static struct wm0010_pdata wm0010_pdata = {
> .gpio_reset = S3C64XX_GPN(6),
> .reset_active_high = 1, /* Active high for Glenfarclas Rev 2 */
> @@ -49,7 +45,6 @@ static struct spi_board_info wm1253_devs[] = {
> .chip_select = 0,
> .mode = SPI_MODE_0,
> .irq = S3C_EINT(4),
> - .controller_data = &wm0010_spi_csinfo,
> .platform_data = &wm0010_pdata,
> },
> };
> @@ -62,7 +57,6 @@ static struct spi_board_info balblair_devs[] = {
> .chip_select = 0,
> .mode = SPI_MODE_0,
> .irq = S3C_EINT(4),
> - .controller_data = &wm0010_spi_csinfo,
> .platform_data = &wm0010_pdata,
> },
> };
> @@ -229,10 +223,6 @@ static struct arizona_pdata wm5102_reva_pdata = {
> },
> };
>
> -static struct s3c64xx_spi_csinfo codec_spi_csinfo = {
> - .line = S3C64XX_GPN(5),
> -};
> -
> static struct spi_board_info wm5102_reva_spi_devs[] = {
> [0] = {
> .modalias = "wm5102",
> @@ -242,7 +232,6 @@ static struct spi_board_info wm5102_reva_spi_devs[] = {
> .mode = SPI_MODE_0,
> .irq = GLENFARCLAS_PMIC_IRQ_BASE +
> WM831X_IRQ_GPIO_2,
> - .controller_data = &codec_spi_csinfo,
> .platform_data = &wm5102_reva_pdata,
> },
> };
> @@ -275,7 +264,6 @@ static struct spi_board_info wm5102_spi_devs[] = {
> .mode = SPI_MODE_0,
> .irq = GLENFARCLAS_PMIC_IRQ_BASE +
> WM831X_IRQ_GPIO_2,
> - .controller_data = &codec_spi_csinfo,
> .platform_data = &wm5102_pdata,
> },
> };
> @@ -298,7 +286,6 @@ static struct spi_board_info wm5110_spi_devs[] = {
> .mode = SPI_MODE_0,
> .irq = GLENFARCLAS_PMIC_IRQ_BASE +
> WM831X_IRQ_GPIO_2,
> - .controller_data = &codec_spi_csinfo,
> .platform_data = &wm5102_reva_pdata,
> },
> };
> diff --git a/arch/arm/mach-s3c/mach-crag6410.c b/arch/arm/mach-s3c/mach-crag6410.c
> index 41f0aba2d2fd..e3e0fe897bcc 100644
> --- a/arch/arm/mach-s3c/mach-crag6410.c
> +++ b/arch/arm/mach-s3c/mach-crag6410.c
> @@ -825,6 +825,15 @@ static const struct gpio_led_platform_data gpio_leds_pdata = {
>
> static struct dwc2_hsotg_plat crag6410_hsotg_pdata;
>
> +static struct gpiod_lookup_table crag_spi0_gpiod_table = {
> + .dev_id = "s3c6410-spi.0",
> + .table = {
> + GPIO_LOOKUP_IDX("GPIOC", 3, "cs", 0, GPIO_ACTIVE_LOW),
> + GPIO_LOOKUP_IDX("GPION", 5, "cs", 1, GPIO_ACTIVE_LOW),
> + { },
> + },
> +};
> +
> static void __init crag6410_machine_init(void)
> {
> /* Open drain IRQs need pullups */
> @@ -856,6 +865,8 @@ static void __init crag6410_machine_init(void)
> i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
>
> samsung_keypad_set_platdata(&crag6410_keypad_data);
> +
> + gpiod_add_lookup_table(&crag_spi0_gpiod_table);
> s3c64xx_spi0_set_platdata(0, 2);
>
> pwm_add_table(crag6410_pwm_lookup, ARRAY_SIZE(crag6410_pwm_lookup));
> diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
> index 8755cd85e83c..5e03c9144bfe 100644
> --- a/drivers/spi/spi-s3c64xx.c
> +++ b/drivers/spi/spi-s3c64xx.c
> @@ -13,10 +13,8 @@
> #include <linux/platform_device.h>
> #include <linux/pm_runtime.h>
> #include <linux/spi/spi.h>
> -#include <linux/gpio.h>
> #include <linux/of.h>
> #include <linux/of_device.h>
> -#include <linux/of_gpio.h>
>
> #include <linux/platform_data/spi-s3c64xx.h>
>
> @@ -655,6 +653,9 @@ static int s3c64xx_spi_prepare_message(struct spi_master *master,
> struct spi_device *spi = msg->spi;
> struct s3c64xx_spi_csinfo *cs = spi->controller_data;
>
> + if (!cs)
> + return 0;
Shouldn't some error code be returned in that case? Or is it normal case?
> +
> /* Configure feedback delay */
> writel(cs->fb_delay & 0x3, sdd->regs + S3C64XX_SPI_FB_CLK);
>
> @@ -830,34 +831,16 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
> if (spi->dev.of_node) {
> cs = s3c64xx_get_slave_ctrldata(spi);
> spi->controller_data = cs;
> - } else if (cs) {
> - /* On non-DT platforms the SPI core will set spi->cs_gpio
> - * to -ENOENT. The GPIO pin used to drive the chip select
> - * is defined by using platform data so spi->cs_gpio value
> - * has to be override to have the proper GPIO pin number.
> - */
> - spi->cs_gpio = cs->line;
> }
>
> - if (IS_ERR_OR_NULL(cs)) {
> + /* NULL is fine, we just avoid using the FB delay (=0) */
> + if (IS_ERR(cs)) {
> dev_err(&spi->dev, "No CS for SPI(%d)\n", spi->chip_select);
> return -ENODEV;
> }
>
> - if (!spi_get_ctldata(spi)) {
> - if (gpio_is_valid(spi->cs_gpio)) {
> - err = gpio_request_one(spi->cs_gpio, GPIOF_OUT_INIT_HIGH,
> - dev_name(&spi->dev));
> - if (err) {
> - dev_err(&spi->dev,
> - "Failed to get /CS gpio [%d]: %d\n",
> - spi->cs_gpio, err);
> - goto err_gpio_req;
> - }
> - }
> -
> + if (!spi_get_ctldata(spi))
> spi_set_ctldata(spi, cs);
> - }
>
> pm_runtime_get_sync(&sdd->pdev->dev);
>
> @@ -909,11 +892,9 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
> /* setup() returns with device de-selected */
> s3c64xx_spi_set_cs(spi, false);
>
> - if (gpio_is_valid(spi->cs_gpio))
> - gpio_free(spi->cs_gpio);
> spi_set_ctldata(spi, NULL);
>
> -err_gpio_req:
> + /* This was dynamically allocated on the DT path */
> if (spi->dev.of_node)
> kfree(cs);
>
> @@ -924,19 +905,9 @@ static void s3c64xx_spi_cleanup(struct spi_device *spi)
> {
> struct s3c64xx_spi_csinfo *cs = spi_get_ctldata(spi);
>
> - if (gpio_is_valid(spi->cs_gpio)) {
> - gpio_free(spi->cs_gpio);
> - if (spi->dev.of_node)
> - kfree(cs);
> - else {
> - /* On non-DT platforms, the SPI core sets
> - * spi->cs_gpio to -ENOENT and .setup()
> - * overrides it with the GPIO pin value
> - * passed using platform data.
> - */
> - spi->cs_gpio = -ENOENT;
> - }
> - }
> + /* This was dynamically allocated on the DT path */
> + if (spi->dev.of_node)
> + kfree(cs);
>
> spi_set_ctldata(spi, NULL);
> }
> @@ -1131,6 +1102,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
> master->prepare_message = s3c64xx_spi_prepare_message;
> master->transfer_one = s3c64xx_spi_transfer_one;
> master->num_chipselect = sci->num_cs;
> + master->use_gpio_descriptors = true;
> master->dma_alignment = 8;
> master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(16) |
> SPI_BPW_MASK(8);
> diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h
> index 10890a4b55b9..391f4dc68742 100644
> --- a/include/linux/platform_data/spi-s3c64xx.h
> +++ b/include/linux/platform_data/spi-s3c64xx.h
> @@ -16,15 +16,13 @@ struct platform_device;
> * struct s3c64xx_spi_csinfo - ChipSelect description
> * @fb_delay: Slave specific feedback delay.
> * Refer to FB_CLK_SEL register definition in SPI chapter.
> - * @line: Custom 'identity' of the CS line.
> *
> - * This is per SPI-Slave Chipselect information.
> + * This is per SPI-Slave FB delay information.
Not sure if this change is needed: this comments will be incorrect if
some new fields are added in future. For example, downstream trees
like [1] have more fields there, not only feedback delay one.
[1] https://android.googlesource.com/kernel/gs/+/refs/heads/android-gs-raviole-5.10-android12-d1/include/linux/platform_data/spi-s3c64xx.h#53
> * Allocate and initialize one in machine init code and make the
> * spi_board_info.controller_data point to it.
> */
> struct s3c64xx_spi_csinfo {
> u8 fb_delay;
> - unsigned line;
> };
>
> /**
> --
> 2.34.1
>
Other than minor comments above:
Reviewed-by: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
Btw, this SPI driver is used in Exynos850 SoC, which I'm working on
right now. It's the shame I didn't enable it yet on my board, so I
can't test the code. But I'm happy to see it's being modernized, kudos
for doing that!
Re: [PATCH 3/3 v2] spi: s3c64xx: Convert to use GPIO descriptors
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH 3/3 v2] spi: s3c64xx: Convert to use GPIO descriptors
- From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
- Date: Tue, 18 Jan 2022 17:27:27 +0200
- Cc: Mark Brown <broonie@xxxxxxxxxx>, linux-spi@xxxxxxxxxxxxxxx, linux-samsung-soc@xxxxxxxxxxxxxxx, Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>, Sylwester Nawrocki <snawrocki@xxxxxxxxxx>
- In-reply-to: <20220118110928.120640-3-linus.walleij@linaro.org>
- References: <20220118110928.120640-1-linus.walleij@linaro.org> <20220118110928.120640-3-linus.walleij@linaro.org>
- Follow-Ups:
- Re: [PATCH 3/3 v2] spi: s3c64xx: Convert to use GPIO descriptors
- From: Mark Brown
- Re: [PATCH 3/3 v2] spi: s3c64xx: Convert to use GPIO descriptors
- From: Linus Walleij
- Re: [PATCH 3/3 v2] spi: s3c64xx: Convert to use GPIO descriptors
- References:
- [PATCH 1/3 v2] spi: s3c64xx: Delete unused boardfile helpers
- From: Linus Walleij
- [PATCH 3/3 v2] spi: s3c64xx: Convert to use GPIO descriptors
- From: Linus Walleij
- [PATCH 1/3 v2] spi: s3c64xx: Delete unused boardfile helpers
- Prev by Date: [PATCH v3 10/10] ACPI / scan: Create platform device for CS35L41
- Next by Date: Patchwork housekeeping for: spi-devel-general
- Previous by thread: Re: [PATCH 3/3 v2] spi: s3c64xx: Convert to use GPIO descriptors
- Next by thread: Re: [PATCH 3/3 v2] spi: s3c64xx: Convert to use GPIO descriptors
- Index(es):
 |