From: Patrice Chotard <patrice.chotard@xxxxxxxxxxx> Some device driver need to communicate to qspi device during the remove process, qspi controller must be functional when spi_unregister_master() is called. To ensure this, replace devm_spi_register_master() by spi_register_master() and spi_unregister_master() is called directly in .remove callback before stopping the qspi controller. This issue was put in evidence using kernel v5.11 and later with a spi-nor which supports the software reset feature introduced by commit d73ee7534cc5 ("mtd: spi-nor: core: perform a Soft Reset on shutdown") Fixes: c530cd1d9d5e ("spi: spi-mem: add stm32 qspi controller") Signed-off-by: Patrice Chotard <patrice.chotard@xxxxxxxxxxx> Cc: <stable@xxxxxxxxxxxxxxx> # 5.8.x --- v2: _ update commit message _ make usage of devm_spi_alloc_master() instead of spi_alloc_master() drivers/spi/spi-stm32-qspi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c index 514337c86d2c..09839a3dbb26 100644 --- a/drivers/spi/spi-stm32-qspi.c +++ b/drivers/spi/spi-stm32-qspi.c @@ -688,7 +688,7 @@ static int stm32_qspi_probe(struct platform_device *pdev) struct resource *res; int ret, irq; - ctrl = spi_alloc_master(dev, sizeof(*qspi)); + ctrl = devm_spi_alloc_master(dev, sizeof(*qspi)); if (!ctrl) return -ENOMEM; @@ -784,7 +784,7 @@ static int stm32_qspi_probe(struct platform_device *pdev) pm_runtime_enable(dev); pm_runtime_get_noresume(dev); - ret = devm_spi_register_master(dev, ctrl); + ret = spi_register_master(ctrl); if (ret) goto err_pm_runtime_free; @@ -817,6 +817,7 @@ static int stm32_qspi_remove(struct platform_device *pdev) struct stm32_qspi *qspi = platform_get_drvdata(pdev); pm_runtime_get_sync(qspi->dev); + spi_unregister_master(qspi->ctrl); /* disable qspi */ writel_relaxed(0, qspi->io_base + QSPI_CR); stm32_qspi_dma_free(qspi); -- 2.17.1