Create the mxic_spi_set_hc_cfg() helper to configure the HC_CFG register. This helper will soon be used by the dirmap implementation and having this code factorized out earlier will clarify this addition. Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx> Reviewed-by: Mark Brown <broonie@xxxxxxxxxx> --- drivers/spi/spi-mxic.c | 31 +++++++++++++++++++------------ 1 file changed, 19 insertions(+), 12 deletions(-) diff --git a/drivers/spi/spi-mxic.c b/drivers/spi/spi-mxic.c index 22a82f5f74b5..c45f949a864d 100644 --- a/drivers/spi/spi-mxic.c +++ b/drivers/spi/spi-mxic.c @@ -280,6 +280,22 @@ static void mxic_spi_hw_init(struct mxic_spi *mxic) mxic->regs + HC_CFG); } +static u32 mxic_spi_prep_hc_cfg(struct spi_device *spi, u32 flags) +{ + int nio = 1; + + if (spi->mode & (SPI_TX_OCTAL | SPI_RX_OCTAL)) + nio = 8; + else if (spi->mode & (SPI_TX_QUAD | SPI_RX_QUAD)) + nio = 4; + else if (spi->mode & (SPI_TX_DUAL | SPI_RX_DUAL)) + nio = 2; + + return flags | HC_CFG_NIO(nio) | + HC_CFG_TYPE(spi->chip_select, HC_CFG_TYPE_SPI_NOR) | + HC_CFG_SLV_ACT(spi->chip_select) | HC_CFG_IDLE_SIO_LVL(1); +} + static int mxic_spi_data_xfer(struct mxic_spi *mxic, const void *txbuf, void *rxbuf, unsigned int len) { @@ -349,7 +365,7 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) { struct mxic_spi *mxic = spi_master_get_devdata(mem->spi->master); - int nio = 1, i, ret; + int i, ret; u32 ss_ctrl; u8 addr[8], cmd[2]; @@ -357,18 +373,9 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem, if (ret) return ret; - if (mem->spi->mode & (SPI_TX_OCTAL | SPI_RX_OCTAL)) - nio = 8; - else if (mem->spi->mode & (SPI_TX_QUAD | SPI_RX_QUAD)) - nio = 4; - else if (mem->spi->mode & (SPI_TX_DUAL | SPI_RX_DUAL)) - nio = 2; - - writel(HC_CFG_NIO(nio) | - HC_CFG_TYPE(mem->spi->chip_select, HC_CFG_TYPE_SPI_NOR) | - HC_CFG_SLV_ACT(mem->spi->chip_select) | HC_CFG_IDLE_SIO_LVL(1) | - HC_CFG_MAN_CS_EN, + writel(mxic_spi_prep_hc_cfg(mem->spi, HC_CFG_MAN_CS_EN), mxic->regs + HC_CFG); + writel(HC_EN_BIT, mxic->regs + HC_EN); ss_ctrl = OP_CMD_BYTES(op->cmd.nbytes) | -- 2.27.0