[PATCH v3 07/17] mtd: spinand: Switch from op macros usage to 'ctrl_ops' in the core

[Apurva Nandan <a-nandan@xxxxxx>]

Make use of the ctrl_ops struct, to introduce the usage of templates
in non-page read/write operations as well. These templates are
initialized at the probe time or at SPI modes switches.

Signed-off-by: Apurva Nandan <a-nandan@xxxxxx>
---
 drivers/mtd/nand/spi/core.c | 36 ++++++++++++++++++++++++------------
 1 file changed, 24 insertions(+), 12 deletions(-)

diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 4a75eb06bb52..30e90527ee3c 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -22,9 +22,11 @@
 
 static int spinand_read_reg_op(struct spinand_device *spinand, u8 reg, u8 *val)
 {
-	struct spi_mem_op op = SPINAND_GET_FEATURE_OP(reg,
-						      spinand->scratchbuf);
 	int ret;
+	struct spi_mem_op op = spinand->ctrl_ops->ops.get_feature;
+
+	op.data.buf.out = spinand->scratchbuf;
+	memset(&op.addr.val, reg, op.addr.nbytes);
 
 	ret = spi_mem_exec_op(spinand->spimem, &op);
 	if (ret)
@@ -36,10 +38,12 @@ static int spinand_read_reg_op(struct spinand_device *spinand, u8 reg, u8 *val)
 
 static int spinand_write_reg_op(struct spinand_device *spinand, u8 reg, u8 val)
 {
-	struct spi_mem_op op = SPINAND_SET_FEATURE_OP(reg,
-						      spinand->scratchbuf);
+	struct spi_mem_op op = spinand->ctrl_ops->ops.set_feature;
+
+	op.data.buf.out = spinand->scratchbuf;
+	memset(&op.addr.val, reg, op.addr.nbytes);
+	memset(spinand->scratchbuf, val, op.data.nbytes);
 
-	*spinand->scratchbuf = val;
 	return spi_mem_exec_op(spinand->spimem, &op);
 }
 
@@ -341,7 +345,7 @@ static void spinand_ondie_ecc_save_status(struct nand_device *nand, u8 status)
 
 static int spinand_write_enable_op(struct spinand_device *spinand)
 {
-	struct spi_mem_op op = SPINAND_WR_EN_DIS_OP(true);
+	struct spi_mem_op op = spinand->ctrl_ops->ops.write_enable;
 
 	return spi_mem_exec_op(spinand->spimem, &op);
 }
@@ -351,7 +355,9 @@ static int spinand_load_page_op(struct spinand_device *spinand,
 {
 	struct nand_device *nand = spinand_to_nand(spinand);
 	unsigned int row = nanddev_pos_to_row(nand, &req->pos);
-	struct spi_mem_op op = SPINAND_PAGE_READ_OP(row);
+	struct spi_mem_op op = spinand->ctrl_ops->ops.page_read;
+
+	op.addr.val = row;
 
 	return spi_mem_exec_op(spinand->spimem, &op);
 }
@@ -475,7 +481,9 @@ static int spinand_program_op(struct spinand_device *spinand,
 {
 	struct nand_device *nand = spinand_to_nand(spinand);
 	unsigned int row = nanddev_pos_to_row(nand, &req->pos);
-	struct spi_mem_op op = SPINAND_PROG_EXEC_OP(row);
+	struct spi_mem_op op = spinand->ctrl_ops->ops.program_execute;
+
+	op.addr.val = row;
 
 	return spi_mem_exec_op(spinand->spimem, &op);
 }
@@ -485,7 +493,9 @@ static int spinand_erase_op(struct spinand_device *spinand,
 {
 	struct nand_device *nand = spinand_to_nand(spinand);
 	unsigned int row = nanddev_pos_to_row(nand, pos);
-	struct spi_mem_op op = SPINAND_BLK_ERASE_OP(row);
+	struct spi_mem_op op = spinand->ctrl_ops->ops.block_erase;
+
+	op.addr.val = row;
 
 	return spi_mem_exec_op(spinand->spimem, &op);
 }
@@ -495,11 +505,13 @@ static int spinand_wait(struct spinand_device *spinand,
 			unsigned long poll_delay_us,
 			u8 *s)
 {
-	struct spi_mem_op op = SPINAND_GET_FEATURE_OP(REG_STATUS,
-						      spinand->scratchbuf);
+	struct spi_mem_op op = spinand->ctrl_ops->ops.get_feature;
 	u8 status;
 	int ret;
 
+	op.data.buf.out = spinand->scratchbuf;
+	memset(&op.addr.val, REG_STATUS, op.addr.nbytes);
+
 	ret = spi_mem_poll_status(spinand->spimem, &op, STATUS_BUSY, 0,
 				  initial_delay_us,
 				  poll_delay_us,
@@ -542,7 +554,7 @@ static int spinand_read_id_op(struct spinand_device *spinand, u8 naddr,
 
 static int spinand_reset_op(struct spinand_device *spinand)
 {
-	struct spi_mem_op op = SPINAND_RESET_OP;
+	struct spi_mem_op op = spinand->ctrl_ops->ops.reset;
 	int ret;
 
 	ret = spi_mem_exec_op(spinand->spimem, &op);
-- 
2.25.1