On Mon, Nov 22, 2021 at 10:33:33AM +0800, LH.Kuo wrote: > Add devicetree bindings SPI Add bindings doc for Sunplus SP7021 > > Signed-off-by: LH.Kuo <lh.kuo@xxxxxxxxxxx> Again, From and S-o-b must match. > --- > Changes in v3: > - Addressed all comments from Mr. Mark Brown > - Addressed all comments from Mr. Philipp Zabel > - Addressed all comments from Mr. Rob Herring > - remove spi transfer_one_message > > .../bindings/spi/spi-sunplus-sp7021.yaml | 95 ++++++++++++++++++++++ > MAINTAINERS | 1 + > 2 files changed, 96 insertions(+) > create mode 100644 Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml > > diff --git a/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml b/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml > new file mode 100644 > index 0000000..5502f15 > --- /dev/null > +++ b/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml > @@ -0,0 +1,95 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright (C) Sunplus Co., Ltd. 2021 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/spi/spi-sunplus-sp7021.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Sunplus sp7021 SPI controller > + > +allOf: > + - $ref: "spi-controller.yaml" > + > +maintainers: > + - lh.kuo <lh.kuo@xxxxxxxxxxx> > + > +properties: > + compatible: > + enum: > + - sunplus,sp7021-spi-controller I think you can drop '-controller'. > + > + reg: > + items: > + - description: Base address and length of the SPI master registers > + - description: Base address and length of the SPI slave registers Drop 'Base address and length of '. The rest is sufficient. > + > + reg-names: > + items: > + - const: spi_master > + - const: spi_slave Drop 'spi_'. > + > + interrupt-names: > + items: > + - const: dma_w_intr > + - const: mas_risc_intr > + - const: slave_risc_intr Drop '_intr', it's redundant. > + > + interrupts: > + minItems: 3 > + > + clocks: > + maxItems: 1 > + > + clocks-names: > + items: > + - const: sys_pll > + > + resets: > + maxItems: 1 > + > + pinctrl-names: > + description: > + A pinctrl state named "default" must be defined. > + const: default > + > + pinctrl-0: > + description: > + A phandle to the default pinctrl state. > + > +required: > + - compatible > + - reg > + - reg-names > + - interrupts > + - interrupt-names > + - clocks > + - clocks-names > + - resets > + - pinctrl-names > + - pinctrl-0 > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/sp-sp7021.h> > + #include <dt-bindings/reset/sp-sp7021.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + spi@9C002D80 { > + compatible = "sunplus,sp7021-spi-controller"; > + reg = <0x9C002D80 0x80>, <0x9C002E00 0x80>; > + reg-names = "spi_master", "spi_slave"; > + interrupt-parent = <&intc>; > + interrupt-names = "dma_w_intr", > + "mas_risc_intr", > + "slave_risc_intr"; > + interrupts = <144 IRQ_TYPE_LEVEL_HIGH>, > + <146 IRQ_TYPE_LEVEL_HIGH>, > + <145 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clkc SPI_COMBO_0>; > + clocks-names = "sys_pll"; > + resets = <&rstc RST_SPI_COMBO_0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pins_spi0>; > + }; > +... > diff --git a/MAINTAINERS b/MAINTAINERS > index 75fa7d5..88f3747 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -18220,6 +18220,7 @@ SUNPLUS SPI CONTROLLER INTERFACE DRIVER > M: LH Kuo <lh.kuo@xxxxxxxxxxx> > L: linux-spi@xxxxxxxxxxxxxxx > S: Maintained > +F: Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml > F: drivers/spi/spi-sunplus-sp7021.c > > SUPERH > -- > 2.7.4 > >