[PATCH 1/2] spi: atmel: Drop slave_config argument in atmel_spi_dma_slave_config()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The callers passed a pointer to slave_config as an argument of
atmel_spi_dma_slave_config(), but they did not use it afterwards.
Use instead a local variable in atmel_spi_dma_slave_config(), and
stop passing arguments that are not needed in the callers.

Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
---
 drivers/spi/spi-atmel.c | 38 +++++++++++++++++---------------------
 1 file changed, 17 insertions(+), 21 deletions(-)

diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index f872cf196c2f..22c7239aff75 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -433,26 +433,25 @@ static bool atmel_spi_can_dma(struct spi_master *master,
 
 }
 
-static int atmel_spi_dma_slave_config(struct atmel_spi *as,
-				struct dma_slave_config *slave_config,
-				u8 bits_per_word)
+static int atmel_spi_dma_slave_config(struct atmel_spi *as, u8 bits_per_word)
 {
 	struct spi_master *master = platform_get_drvdata(as->pdev);
+	struct dma_slave_config	slave_config;
 	int err = 0;
 
 	if (bits_per_word > 8) {
-		slave_config->dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
-		slave_config->src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+		slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+		slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
 	} else {
-		slave_config->dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
-		slave_config->src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+		slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+		slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
 	}
 
-	slave_config->dst_addr = (dma_addr_t)as->phybase + SPI_TDR;
-	slave_config->src_addr = (dma_addr_t)as->phybase + SPI_RDR;
-	slave_config->src_maxburst = 1;
-	slave_config->dst_maxburst = 1;
-	slave_config->device_fc = false;
+	slave_config.dst_addr = (dma_addr_t)as->phybase + SPI_TDR;
+	slave_config.src_addr = (dma_addr_t)as->phybase + SPI_RDR;
+	slave_config.src_maxburst = 1;
+	slave_config.dst_maxburst = 1;
+	slave_config.device_fc = false;
 
 	/*
 	 * This driver uses fixed peripheral select mode (PS bit set to '0' in
@@ -468,8 +467,8 @@ static int atmel_spi_dma_slave_config(struct atmel_spi *as,
 	 * So we'd rather write only one data at the time. Hence the transmit
 	 * path works the same whether FIFOs are available (and enabled) or not.
 	 */
-	slave_config->direction = DMA_MEM_TO_DEV;
-	if (dmaengine_slave_config(master->dma_tx, slave_config)) {
+	slave_config.direction = DMA_MEM_TO_DEV;
+	if (dmaengine_slave_config(master->dma_tx, &slave_config)) {
 		dev_err(&as->pdev->dev,
 			"failed to configure tx dma channel\n");
 		err = -EINVAL;
@@ -483,8 +482,8 @@ static int atmel_spi_dma_slave_config(struct atmel_spi *as,
 	 * So the receive path works the same whether FIFOs are available (and
 	 * enabled) or not.
 	 */
-	slave_config->direction = DMA_DEV_TO_MEM;
-	if (dmaengine_slave_config(master->dma_rx, slave_config)) {
+	slave_config.direction = DMA_DEV_TO_MEM;
+	if (dmaengine_slave_config(master->dma_rx, &slave_config)) {
 		dev_err(&as->pdev->dev,
 			"failed to configure rx dma channel\n");
 		err = -EINVAL;
@@ -496,7 +495,6 @@ static int atmel_spi_dma_slave_config(struct atmel_spi *as,
 static int atmel_spi_configure_dma(struct spi_master *master,
 				   struct atmel_spi *as)
 {
-	struct dma_slave_config	slave_config;
 	struct device *dev = &as->pdev->dev;
 	int err;
 
@@ -518,7 +516,7 @@ static int atmel_spi_configure_dma(struct spi_master *master,
 		goto error;
 	}
 
-	err = atmel_spi_dma_slave_config(as, &slave_config, 8);
+	err = atmel_spi_dma_slave_config(as, 8);
 	if (err)
 		goto error;
 
@@ -700,7 +698,6 @@ static int atmel_spi_next_xfer_dma_submit(struct spi_master *master,
 	struct dma_chan		*txchan = master->dma_tx;
 	struct dma_async_tx_descriptor *rxdesc;
 	struct dma_async_tx_descriptor *txdesc;
-	struct dma_slave_config	slave_config;
 	dma_cookie_t		cookie;
 
 	dev_vdbg(master->dev.parent, "atmel_spi_next_xfer_dma_submit\n");
@@ -712,8 +709,7 @@ static int atmel_spi_next_xfer_dma_submit(struct spi_master *master,
 
 	*plen = xfer->len;
 
-	if (atmel_spi_dma_slave_config(as, &slave_config,
-				       xfer->bits_per_word))
+	if (atmel_spi_dma_slave_config(as, xfer->bits_per_word))
 		goto err_exit;
 
 	/* Send both scatterlists */
-- 
2.25.1




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux