Re: [PATCH v3 11/11] arm64: dts: Add Pensando Elba SoC support

[Brad Larson <brad@xxxxxxxxxxx>]

Hi Mark,

On Mon, Nov 8, 2021 at 2:26 AM Mark Rutland <mark.rutland@xxxxxxx> wrote:
>
> No; as above, you should *not* use GIC_CPU_MASK_SIMPLE() at all for GICv3. i.e.
>
> >         timer {
> >                 compatible = "arm,armv8-timer";
> >                 interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
> >                              <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> >                              <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> >                              <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
> >         };
>
> Please see the GICv3 binding documentation:
>
>   Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
>
> ... and note that it does not have the cpumask field as use by the binding for
> prior generations of GIC:
>
>   Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
>
>
> If you've seen other dts files using GIC_CPU_MASK_SIMPLE() with GICv3, those
> are incorrect, and need to be fixed.
>
> Thanks,
> Mark.

I'll use the bindings documentation as the primary reference.  The use of
GIC_CPU_MASK_SIMPLE() is removed and tests ok.  These arm64 dts files in
linux-next are gic-v3 and use GIC_CPU_MASK_SIMPLE(1, 2, 4, 8)

./nvidia/tegra234.dtsi
./renesas/r9a07g044.dtsi
./renesas/r8a779a0.dtsi
./qcom/sm8350.dtsi
./qcom/sm8250.dtsi
./freescale/fsl-ls1028a.dtsi
./freescale/imx8mp.dtsi
./freescale/imx8mn.dtsi
./freescale/imx8mm.dtsi

Thanks,
Brad