Hi Wolfram, On Fri, Oct 1, 2021 at 9:55 AM Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> wrote: > > Hi Prabhakar, > > > > Is RPCIF_CMNCR_IO3FV and RPCIF_CMNCR_IO2FV actually documented in your > > > datasheets? I am asking because I have a patch pending to remove writing > > > to undocumented locations. So, I was aboout to remove the IO3FV and > > > IO2FV macros. > > > > > Yes they are documented, you should be able to download the HW manual from [1] > > Great, then I will keep them! > > > > > + regmap_write(rpc->regmap, RPCIF_PHYADJ2, 0x00008080); > > > > + regmap_write(rpc->regmap, RPCIF_PHYADJ1, 0x80000024); > > > > > > Can't we have defines for these magic values? At least in my latest Gen3 > > > documentation, these values are explained. > > > > > RZ/G2L manual doesn't explain these bits. Let me refer to R-Car Gen3 > > and define them as macros. > > Seems like we have the best of both worlds then with the documentation > ;) > Indeed :) > > > > + if (rpc->type == RPCIF_RCAR_GEN3) { > > > > + regmap_write(rpc->regmap, RPCIF_PHYCNT, RPCIF_PHYCNT_STRTIM(7) | > > > > + RPCIF_PHYCNT_PHYMEM(hyperflash ? 3 : 0) | 0x260); > > > > + } else { > > > > + regmap_read(rpc->regmap, RPCIF_PHYCNT, &dummy); > > > > + dummy &= ~RPCIF_PHYCNT_PHYMEM_MASK; > > > > + dummy |= RPCIF_PHYCNT_PHYMEM(hyperflash ? 3 : 0) | 0x260; > > > > + regmap_write(rpc->regmap, RPCIF_PHYCNT, dummy); > > > > > > regmap_update_bits? > > > > > Im a bit hesitant to use regmap_update_bits() here as some of the bits > > are not documented. > > Hmm, maybe I should then update the patch avoiding undocumented register > access beforehand? I will download your docs and see what remains and > send that out for you to check. Somewhen later today. > > Sounds good? > Fine with me. Cheers, Prabhakar > Happy hacking, > > Wolfram >