[PATCH v11 32/34] ARM: tegra: Add Memory Client resets to Tegra20 GR2D, GR3D and Host1x

[Dmitry Osipenko <digetx@xxxxxxxxx>]

Memory access must be blocked before hardware reset is asserted and before
power is gated, otherwise a serious hardware fault is inevitable. Add
reset for memory clients to the GR2D, GR3D and Host1x nodes.

Tested-by: Paul Fertser <fercerpav@xxxxxxxxx> # PAZ00 T20
Tested-by: Nicolas Chauvet <kwizart@xxxxxxxxx> # PAZ00 T20
Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
 arch/arm/boot/dts/tegra20.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 4abb6634e8ae..8ab77583846b 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -40,8 +40,8 @@ host1x@50000000 {
 		interrupt-names = "syncpt", "host1x";
 		clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
 		clock-names = "host1x";
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
+		resets = <&tegra_car 28>, <&mc TEGRA20_MC_RESET_HC>;
+		reset-names = "host1x", "mc";
 		operating-points-v2 = <&host1x_dvfs_opp_table>;
 		power-domains = <&pd_core>;
 
@@ -98,8 +98,8 @@ gr2d@54140000 {
 			reg = <0x54140000 0x00040000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA20_CLK_GR2D>;
-			resets = <&tegra_car 21>;
-			reset-names = "2d";
+			resets = <&tegra_car 21>, <&mc TEGRA20_MC_RESET_2D>;
+			reset-names = "2d", "mc";
 			operating-points-v2 = <&gr2d_dvfs_opp_table>;
 			power-domains = <&pd_core>;
 		};
@@ -108,8 +108,8 @@ gr3d@54180000 {
 			compatible = "nvidia,tegra20-gr3d";
 			reg = <0x54180000 0x00040000>;
 			clocks = <&tegra_car TEGRA20_CLK_GR3D>;
-			resets = <&tegra_car 24>;
-			reset-names = "3d";
+			resets = <&tegra_car 24>, <&mc TEGRA20_MC_RESET_3D>;
+			reset-names = "3d", "mc";
 			operating-points-v2 = <&gr3d_dvfs_opp_table>;
 			power-domains = <&pd_3d>;
 		};
-- 
2.32.0