Re: [PATCH 11/13] mtd: spinand: Add support for Power-on-Reset (PoR) instruction

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Miquèl,

On 07/08/21 12:38 am, Miquel Raynal wrote:
Hi Apurva,

Apurva Nandan <a-nandan@xxxxxx> wrote on Tue, 13 Jul 2021 13:05:36
+0000:

Manufacturers like Gigadevice and Winbond are adding Power-on-Reset
functionality in their SPI NAND flash chips. PoR instruction consists
of a 66h command followed by 99h command, and is different from the FFh
reset. The reset command FFh just clears the status only registers,
while the PoR command erases all the configurations written to the
flash and is equivalent to a power-down -> power-up cycle.

Add support for the Power-on-Reset command for any flash that provides
this feature.

Datasheet: https://www.winbond.com/export/sites/winbond/datasheet/W35N01JW_Datasheet_Brief.pdf

Signed-off-by: Apurva Nandan <a-nandan@xxxxxx>
---

[...]
				\
@@ -218,6 +230,8 @@ struct spinand_device;
   * reading/programming/erasing when the RESET occurs. Since we always
   * issue a RESET when the device is IDLE, 5us is selected for both initial
   * and poll delay.
+ * Power on Reset can take max upto 500 us to complete, so sleep for 1000 us

s/max upto/up to/


Okay!

+ * to 1200 us safely.

I don't really get why, if the maximum is 500, then let's wait for
500us.


Generally we keep some margin from the maximum time, no?

   */
  #define SPINAND_READ_INITIAL_DELAY_US	6
  #define SPINAND_READ_POLL_DELAY_US	5
@@ -227,6 +241,8 @@ struct spinand_device;
  #define SPINAND_WRITE_POLL_DELAY_US	15
  #define SPINAND_ERASE_INITIAL_DELAY_US	250
  #define SPINAND_ERASE_POLL_DELAY_US	50
+#define SPINAND_POR_MIN_DELAY_US	1000
+#define SPINAND_POR_MAX_DELAY_US	1200
#define SPINAND_WAITRDY_TIMEOUT_MS 400 @@ -351,6 +367,7 @@ struct spinand_ecc_info {
  #define SPINAND_HAS_QE_BIT		BIT(0)
  #define SPINAND_HAS_CR_FEAT_BIT		BIT(1)
  #define SPINAND_HAS_OCTAL_DTR_BIT	BIT(2)
+#define SPINAND_HAS_POR_CMD_BIT		BIT(3)
/**
   * struct spinand_ondie_ecc_conf - private SPI-NAND on-die ECC engine structure




Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/


Thanks,
Apurva Nandan



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux