Commit 3a70dd2d0503 ("spi: mediatek: fix fifo rx mode") claims that fifo RX mode was never handled, and adds the presumably missing code to the FIFO transfer function. However, the claim that receive data was not handled is incorrect. It was handled as part of interrupt handling after the transfer was complete. The code added with the above mentioned commit reads data from the receive FIFO before the transfer is started, which is wrong. This results in an actual transfer error on a Hayato Chromebook. Remove the code trying to handle receive data before the transfer is started to fix the problem. Fixes: 3a70dd2d0503 ("spi: mediatek: fix fifo rx mode") Cc: Peter Hess <peter.hess@xxxxxxxxxx> Cc: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx> Cc: Tzung-Bi Shih <tzungbi@xxxxxxxxxx> Cc: Hsin-Yi Wang <hsinyi@xxxxxxxxxx> Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> --- drivers/spi/spi-mt65xx.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c index 68dca8ceb3ad..7914255521c3 100644 --- a/drivers/spi/spi-mt65xx.c +++ b/drivers/spi/spi-mt65xx.c @@ -426,24 +426,15 @@ static int mtk_spi_fifo_transfer(struct spi_master *master, mtk_spi_prepare_transfer(master, xfer); mtk_spi_setup_packet(master); - cnt = xfer->len / 4; - if (xfer->tx_buf) + if (xfer->tx_buf) { + cnt = xfer->len / 4; iowrite32_rep(mdata->base + SPI_TX_DATA_REG, xfer->tx_buf, cnt); - - if (xfer->rx_buf) - ioread32_rep(mdata->base + SPI_RX_DATA_REG, xfer->rx_buf, cnt); - - remainder = xfer->len % 4; - if (remainder > 0) { - reg_val = 0; - if (xfer->tx_buf) { + remainder = xfer->len % 4; + if (remainder > 0) { + reg_val = 0; memcpy(®_val, xfer->tx_buf + (cnt * 4), remainder); writel(reg_val, mdata->base + SPI_TX_DATA_REG); } - if (xfer->rx_buf) { - reg_val = readl(mdata->base + SPI_RX_DATA_REG); - memcpy(xfer->rx_buf + (cnt * 4), ®_val, remainder); - } } mtk_spi_enable_transfer(master); -- 2.25.1