[PATCH] spi: imx: Simplify logic in spi_imx_push()

[Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>]

For each usage of fifo_words it is clear if ->dynamic_burst is true or
not. This can be used to simplify the function a bit.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
 drivers/spi/spi-imx.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 39dc02e366f4..c171765d05b1 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1032,52 +1032,47 @@ static void spi_imx_set_burst_len(struct spi_imx_data *spi_imx, int n_bits)
 
 	ctrl = readl(spi_imx->base + MX51_ECSPI_CTRL);
 	ctrl &= ~MX51_ECSPI_CTRL_BL_MASK;
 	ctrl |= ((n_bits - 1) << MX51_ECSPI_CTRL_BL_OFFSET);
 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
 }
 
 static void spi_imx_push(struct spi_imx_data *spi_imx)
 {
-	unsigned int burst_len, fifo_words;
+	unsigned int burst_len;
 
-	if (spi_imx->dynamic_burst)
-		fifo_words = 4;
-	else
-		fifo_words = spi_imx_bytes_per_word(spi_imx->bits_per_word);
 	/*
 	 * Reload the FIFO when the remaining bytes to be transferred in the
 	 * current burst is 0. This only applies when bits_per_word is a
 	 * multiple of 8.
 	 */
 	if (!spi_imx->remainder) {
 		if (spi_imx->dynamic_burst) {
 
 			/* We need to deal unaligned data first */
 			burst_len = spi_imx->count % MX51_ECSPI_CTRL_MAX_BURST;
 
 			if (!burst_len)
 				burst_len = MX51_ECSPI_CTRL_MAX_BURST;
 
 			spi_imx_set_burst_len(spi_imx, burst_len * 8);
 
 			spi_imx->remainder = burst_len;
 		} else {
-			spi_imx->remainder = fifo_words;
+			spi_imx->remainder = spi_imx_bytes_per_word(spi_imx->bits_per_word);
 		}
 	}
 
 	while (spi_imx->txfifo < spi_imx->devtype_data->fifo_size) {
 		if (!spi_imx->count)
 			break;
 		if (spi_imx->dynamic_burst &&
-		    spi_imx->txfifo >= DIV_ROUND_UP(spi_imx->remainder,
-						     fifo_words))
+		    spi_imx->txfifo >= DIV_ROUND_UP(spi_imx->remainder, 4))
 			break;
 		spi_imx->tx(spi_imx);
 		spi_imx->txfifo++;
 	}
 
 	if (!spi_imx->slave_mode)
 		spi_imx->devtype_data->trigger(spi_imx);
 }
 
-- 
2.30.2