Add pm_runtime calls in probe/probe error path and remove in order to be consistent in all places in ordering and ensure that pm_runtime is disabled prior to resources used by the SPI controller. This patch also fixes the 2 following warnings on driver remove: WARNING: CPU: 0 PID: 743 at drivers/clk/clk.c:594 clk_core_disable_lock+0x18/0x24 WARNING: CPU: 0 PID: 743 at drivers/clk/clk.c:476 clk_unprepare+0x24/0x2c Fixes: 038ac869c9d2 ("spi: stm32: add runtime PM support") Signed-off-by: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx> Signed-off-by: Alain Volmat <alain.volmat@xxxxxxxxxxx> --- drivers/spi/spi-stm32.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index 8ffcffbb8157..a92a28933edb 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -1925,6 +1925,7 @@ static int stm32_spi_probe(struct platform_device *pdev) master->can_dma = stm32_spi_can_dma; pm_runtime_set_active(&pdev->dev); + pm_runtime_get_noresume(&pdev->dev); pm_runtime_enable(&pdev->dev); ret = spi_register_master(master); @@ -1940,6 +1941,8 @@ static int stm32_spi_probe(struct platform_device *pdev) err_pm_disable: pm_runtime_disable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); err_dma_release: if (spi->dma_tx) dma_release_channel(spi->dma_tx); @@ -1956,9 +1959,14 @@ static int stm32_spi_remove(struct platform_device *pdev) struct spi_master *master = platform_get_drvdata(pdev); struct stm32_spi *spi = spi_master_get_devdata(master); + pm_runtime_get_sync(&pdev->dev); + spi_unregister_master(master); spi->cfg->disable(spi); + pm_runtime_disable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); if (master->dma_tx) dma_release_channel(master->dma_tx); if (master->dma_rx) @@ -1966,7 +1974,6 @@ static int stm32_spi_remove(struct platform_device *pdev) clk_disable_unprepare(spi->clk); - pm_runtime_disable(&pdev->dev); pinctrl_pm_select_sleep_state(&pdev->dev); -- 2.25.1