Re: [PATCH v14 00/12] add ecspi ERR009165 for i.mx6/7 soc family

[Fabio Estevam <festevam@xxxxxxxxx>]

Hi Robin,

On Wed, Apr 7, 2021 at 4:15 AM Robin Gong <yibin.gong@xxxxxxx> wrote:
>
> There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
> transfer to be send twice in DMA mode. Please get more information from:
> https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf. The workaround is adding
> new sdma ram script which works in XCH  mode as PIO inside sdma instead
> of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0. The issue should be
> exist on all legacy i.mx6/7 soc family before i.mx6ul.
> NXP fix this design issue from i.mx6ul, so newer chips including i.mx6ul/
> 6ull/6sll do not need this workaroud anymore. All other i.mx6/7/8 chips
> still need this workaroud. This patch set add new 'fsl,imx6ul-ecspi'
> for ecspi driver and 'ecspi_fixed' in sdma driver to choose if need errata
> or not.
> The first two reverted patches should be the same issue, though, it
> seems 'fixed' by changing to other shp script. Hope Sean or Sascha could
> have the chance to test this patch set if could fix their issues.
> Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not work
> on i.mx8mm because the event id is zero.
>
> PS:
>    Please get sdma firmware from below linux-firmware and copy it to your
> local rootfs /lib/firmware/imx/sdma.
> https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/imx/sdma

Without this series, SPI DMA does not work on i.MX8MM:

 [   41.315984] spi_master spi1: I/O Error in DMA RX

I applied your series and SPI DMA works now:

Reviewed-by: Fabio Estevam <festevam@xxxxxxxxx>

Thanks