1.Add standard spi-cs-high support 2.Refer to spi-controller.yaml for details Signed-off-by: Jon Lin <jon.lin@xxxxxxxxxxxxxx> --- drivers/spi/spi-rockchip.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index be7d90e18a3f..4b08be25c33d 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -108,6 +108,8 @@ #define CR0_OPM_MASTER 0x0 #define CR0_OPM_SLAVE 0x1 +#define CR0_SOI_OFFSET 23 + #define CR0_MTM_OFFSET 0x21 /* Bit fields in SER, 2bit */ @@ -238,7 +240,7 @@ static void rockchip_spi_set_cs(struct spi_device *spi, bool enable) { struct spi_controller *ctlr = spi->controller; struct rockchip_spi *rs = spi_controller_get_devdata(ctlr); - bool cs_asserted = !enable; + bool cs_asserted = spi->mode & SPI_CS_HIGH ? enable : !enable; /* Return immediately for no-op */ if (cs_asserted == rs->cs_asserted[spi->chip_select]) @@ -509,6 +511,8 @@ static int rockchip_spi_config(struct rockchip_spi *rs, cr0 |= (spi->mode & 0x3U) << CR0_SCPH_OFFSET; if (spi->mode & SPI_LSB_FIRST) cr0 |= CR0_FBM_LSB << CR0_FBM_OFFSET; + if (spi->mode & SPI_CS_HIGH) + cr0 |= BIT(spi->chip_select) << CR0_SOI_OFFSET; if (xfer->rx_buf && xfer->tx_buf) cr0 |= CR0_XFM_TR << CR0_XFM_OFFSET; @@ -787,7 +791,7 @@ static int rockchip_spi_probe(struct platform_device *pdev) ctlr->auto_runtime_pm = true; ctlr->bus_num = pdev->id; - ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP | SPI_LSB_FIRST; + ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP | SPI_LSB_FIRST | SPI_CS_HIGH; if (slave_mode) { ctlr->mode_bits |= SPI_NO_CS; ctlr->slave_abort = rockchip_spi_slave_abort; -- 2.17.1