[PATCH v3 net-next 0/2] Adapt the sja1105 DSA driver to the SPI controller's transfer limits

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Vladimir Oltean <vladimir.oltean@xxxxxxx>

This series changes the SPI transfer procedure in sja1105 to take into
consideration the buffer size limitations that the SPI controller driver
might have.

Changes in v3:
- Avoid a signed vs unsigned issue in the interpretation of SIZE_MAX.
- Move the max transfer length checks to probe time, since nothing will
  change dynamically.

Changes in v2:
Remove the driver's use of cs_change and send multiple, smaller SPI
messages instead of a single large one.

Vladimir Oltean (2):
  net: dsa: sja1105: send multiple spi_messages instead of using
    cs_change
  net: dsa: sja1105: adapt to a SPI controller with a limited max
    transfer size

 drivers/net/dsa/sja1105/sja1105.h             |  1 +
 drivers/net/dsa/sja1105/sja1105_main.c        | 28 ++++++++
 drivers/net/dsa/sja1105/sja1105_spi.c         | 66 +++++--------------
 .../net/dsa/sja1105/sja1105_static_config.h   |  2 +
 4 files changed, 49 insertions(+), 48 deletions(-)

-- 
2.25.1




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux