Just saw a missing update, i am sending a v4. Sorry Patrice On 5/18/21 11:39 AM, patrice.chotard@xxxxxxxxxxx wrote: > From: Patrice Chotard <patrice.chotard@xxxxxxxxxxx> > > This series adds support for the spi_mem_poll_status() spinand > interface. > Some QSPI controllers allows to poll automatically memory > status during operations (erase, read or write). This allows to > offload the CPU for this task. > STM32 QSPI is supporting this feature, driver update are also > part of this series. > > Chnages in v3: > - Add spi_mem_read_status() which allows to read 8 or 16 bits status. > - Add initial_delay_us and polling_delay_us parameters to spi_mem_poll_status(). > and also to poll_status() callback. > - Move spi_mem_supports_op() in SW-based polling case. > - Add delay before invoquing read_poll_timeout(). > - Remove the reinit/wait_for_completion() added in v2. > - Add initial_delay_us and polling_delay_us parameters to spinand_wait(). > - Add SPINAND_READ/WRITE/ERASE/RESET_INITIAL_DELAY_US and > SPINAND_READ/WRITE/ERASE/RESET_POLL_DELAY_US defines. > - Remove spi_mem_finalize_op() API added in v2. > > Changes in v2: > - Indicates the spi_mem_poll_status() timeout unit > - Use 2-byte wide status register > - Add spi_mem_supports_op() call in spi_mem_poll_status() > - Add completion management in spi_mem_poll_status() > - Add offload/non-offload case management in spi_mem_poll_status() > - Optimize the non-offload case by using read_poll_timeout() > - mask and match stm32_qspi_poll_status()'s parameters are 2-byte wide > - Make usage of new spi_mem_finalize_op() API in > stm32_qspi_wait_poll_status() > > Patrice Chotard (3): > spi: spi-mem: add automatic poll status functions > mtd: spinand: use the spi-mem poll status APIs > spi: stm32-qspi: add automatic poll status feature > > drivers/mtd/nand/spi/core.c | 45 +++++++++++++------ > drivers/spi/spi-mem.c | 85 ++++++++++++++++++++++++++++++++++++ > drivers/spi/spi-stm32-qspi.c | 83 +++++++++++++++++++++++++++++++---- > include/linux/mtd/spinand.h | 11 ++++- > include/linux/spi/spi-mem.h | 14 ++++++ > 5 files changed, 216 insertions(+), 22 deletions(-) >