[PATCH v4 1/2] mtd: spi-nor: macronix: add support for Macronix octaflash

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The octaflash is an xSPI compliant octal DTR flash. Add support
for using it in octal DTR mode.

Try to verify the flash ID to check whether the flash memory in octal
DTR mode is correct. When reading ID in OCTAL DTR mode, ID will appear
in a repeated manner. ex: ID[0] = 0xc2, ID[1] = 0xc2, ID[2] = 0x94,
ID[3] = 0x94... Rearrange the order so that the ID can pass.

The octaflash series can be divided into the following types:

MX25 series : Serial NOR Flash.
MX66 series : Serial NOR Flash with stacked die.(Size larger than 1Gb)
LM/UM series : Up to 250MHz clock frequency with both DTR/STR operation.
LW/UW series : Support simultaneous Read-while-Write operation in multiple
	       bank architecture. Read-while-write feature which means read
	       data one bank while another bank is programing or erasing.

MX25LM : 3.0V Octal I/O
 -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7841/MX25LM51245G,%203V,%20512Mb,%20v1.1.pdf

MX25UM : 1.8V Octal I/O
 -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7525/MX25UM51245G%20Extreme%20Speed,%201.8V,%20512Mb,%20v1.0.pdf

MX66LM : 3.0V Octal I/O with stacked die
 -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7929/MX66LM1G45G,%203V,%201Gb,%20v1.1.pdf

MX66UM : 1.8V Octal I/O with stacked die
 -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7721/MX66UM1G45G,%201.8V,%201Gb,%20v1.1.pdf

MX25LW : 3.0V Octal I/O with Read-while-Write
MX25UW : 1.8V Octal I/O with Read-while-Write
MX66LW : 3.0V Octal I/O with Read-while-Write and stack die
MX66UW : 1.8V Octal I/O with Read-while-Write and stack die

About LW/UW series, please contact us freely if you have any
questions. For adding Octal NOR Flash IDs, we have validated
each Flash on plateform zynq-picozed.

Signed-off-by: Zhengxun Li <zhengxunli@xxxxxxxxxxx>
---
 drivers/mtd/spi-nor/macronix.c | 172 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 172 insertions(+)

diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
index 42c2cf3..00ddecc 100644
--- a/drivers/mtd/spi-nor/macronix.c
+++ b/drivers/mtd/spi-nor/macronix.c
@@ -8,6 +8,12 @@
 
 #include "core.h"
 
+#define SPINOR_OP_RD_CR2		0x71		/* Read configuration register 2 */
+#define SPINOR_OP_WR_CR2		0x72		/* Write configuration register 2 */
+#define SPINOR_REG_MXIC_CR2_MODE	0x00000000	/* For setting octal DTR mode */
+#define SPINOR_REG_MXIC_OPI_DTR_EN	0x2		/* Enable Octal DTR */
+#define SPINOR_REG_MXIC_SPI_EN		0x0		/* Enable SPI */
+
 static int
 mx25l25635_post_bfpt_fixups(struct spi_nor *nor,
 			    const struct sfdp_parameter_header *bfpt_header,
@@ -32,6 +38,72 @@
 	.post_bfpt = mx25l25635_post_bfpt_fixups,
 };
 
+/**
+ * spi_nor_macronix_octal_dtr_enable() - Enable octal DTR on Macronix flashes.
+ * @nor:		pointer to a 'struct spi_nor'
+ * @enable:		whether to enable Octal DTR or switch back to SPI
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_macronix_octal_dtr_enable(struct spi_nor *nor, bool enable)
+{
+	struct spi_mem_op op;
+	u8 *buf = nor->bouncebuf, i;
+	int ret;
+
+	/* Set/unset the octal and DTR enable bits. */
+	ret = spi_nor_write_enable(nor);
+	if (ret)
+		return ret;
+
+	if (enable)
+		*buf = SPINOR_REG_MXIC_OPI_DTR_EN;
+	else
+		*buf = SPINOR_REG_MXIC_SPI_EN;
+
+	op = (struct spi_mem_op)
+		SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_CR2, 1),
+			   SPI_MEM_OP_ADDR(4, SPINOR_REG_MXIC_CR2_MODE, 1),
+			   SPI_MEM_OP_NO_DUMMY,
+			   SPI_MEM_OP_DATA_OUT(1, buf, 1));
+
+	if (!enable)
+		spi_nor_spimem_setup_op(nor, &op, SNOR_PROTO_8_8_8_DTR);
+
+	ret = spi_mem_exec_op(nor->spimem, &op);
+	if (ret)
+		return ret;
+
+	/* Read flash ID to make sure the switch was successful. */
+	op = (struct spi_mem_op)
+		SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDID, 1),
+			   SPI_MEM_OP_ADDR(enable ? 4 : 0, 0, 1),
+			   SPI_MEM_OP_DUMMY(enable ? 4 : 0, 1),
+			   SPI_MEM_OP_DATA_IN(SPI_NOR_MAX_ID_LEN, buf, 1));
+
+	if (enable)
+		spi_nor_spimem_setup_op(nor, &op, SNOR_PROTO_8_8_8_DTR);
+
+	ret = spi_mem_exec_op(nor->spimem, &op);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < nor->info->id_len; i++)
+		if (buf[i * 2] != nor->info->id[i])
+			return -EINVAL;
+
+	return 0;
+}
+
+static void octaflash_default_init(struct spi_nor *nor)
+{
+	nor->params->octal_dtr_enable = spi_nor_macronix_octal_dtr_enable;
+}
+
+static struct spi_nor_fixups octaflash_fixups = {
+	.default_init = octaflash_default_init,
+};
+
 static const struct flash_info macronix_parts[] = {
 	/* Macronix */
 	{ "mx25l512e",   INFO(0xc22010, 0, 64 * 1024,   1, SECT_4K) },
@@ -86,6 +158,106 @@
 	{ "mx66u2g45g",	 INFO(0xc2253c, 0, 64 * 1024, 4096,
 			      SECT_4K | SPI_NOR_DUAL_READ |
 			      SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
+	{ "mx66lm2g45g", INFO(0xc2853c, 0, 64 * 1024, 4096,
+			      SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+			      SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES)
+		.fixups = &octaflash_fixups },
+	{ "mx66lm1g45g", INFO(0xc2853b, 0, 32 * 1024, 4096,
+			      SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+			      SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES)
+		.fixups = &octaflash_fixups },
+	{ "mx66lw1g45g", INFO(0xc2863b, 0, 32 * 1024, 4096,
+			      SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+			      SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES)
+		.fixups = &octaflash_fixups },
+	{ "mx25lm51245g", INFO(0xc2853a, 0, 16 * 1024, 4096,
+			       SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+			       SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES)
+		.fixups = &octaflash_fixups },
+	{ "mx25lw51245g", INFO(0xc2863a, 0, 16 * 1024, 4096,
+			       SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+			       SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES)
+		.fixups = &octaflash_fixups },
+	{ "mx25lm25645g", INFO(0xc28539, 0, 8 * 1024, 4096,
+			       SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+			       SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES)
+		.fixups = &octaflash_fixups },
+	{ "mx25lw25645g", INFO(0xc28639, 0, 8 * 1024, 4096,
+			       SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+			       SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES)
+		.fixups = &octaflash_fixups },
+	{ "mx66um2g45g", INFO(0xc2803c, 0, 64 * 1024, 4096,
+			      SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+			      SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES)
+		.fixups = &octaflash_fixups },
+	{ "mx66uw2g345g", INFO(0xc2843c, 0, 64 * 1024, 4096,
+			       SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+			       SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES)
+		.fixups = &octaflash_fixups },
+	{ "mx66uw2g345gx0", INFO(0xc2943c, 0, 64 * 1024, 4096,
+				 SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+				 SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES)
+		.fixups = &octaflash_fixups },
+	{ "mx66um1g45g", INFO(0xc2803b, 0, 32 * 1024, 4096,
+			      SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+			      SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES)
+		.fixups = &octaflash_fixups },
+	{ "mx66um1g45g40", INFO(0xc2808b, 0, 32 * 1024, 4096,
+				SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+				SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES)
+		.fixups = &octaflash_fixups },
+	{ "mx66uw1g45g", INFO(0xc2813b, 0, 32 * 1024, 4096,
+			      SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+			      SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES)
+		.fixups = &octaflash_fixups },
+	{ "mx25um51245g", INFO(0xc2803a, 0, 16 * 1024, 4096,
+			       SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+			       SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES)
+		.fixups = &octaflash_fixups },
+	{ "mx25uw51245g", INFO(0xc2813a, 0, 16 * 1024, 4096,
+			       SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+			       SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES)
+		.fixups = &octaflash_fixups },
+	{ "mx25uw51345g", INFO(0xc2843a, 0, 16 * 1024, 4096,
+			       SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+			       SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES)
+		.fixups = &octaflash_fixups },
+	{ "mx25um25645g", INFO(0xc28039, 0, 8 * 1024, 4096,
+			       SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+			       SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES)
+		.fixups = &octaflash_fixups },
+	{ "mx25uw25645g", INFO(0xc28139, 0, 8 * 1024, 4096,
+			       SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+			       SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES)
+		.fixups = &octaflash_fixups },
+	{ "mx25um25345g", INFO(0xc28339, 0, 8 * 1024, 4096,
+			       SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+			       SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES)
+		.fixups = &octaflash_fixups },
+	{ "mx25uw25345g", INFO(0xc28439, 0, 8 * 1024, 4096,
+			       SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+			       SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES)
+		.fixups = &octaflash_fixups },
+	{ "mx25uw12845g", INFO(0xc28138, 0, 4 * 1024, 4096,
+			       SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+			       SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES)
+		.fixups = &octaflash_fixups },
+	{ "mx25uw12a45g", INFO(0xc28938, 0, 4 * 1024, 4096,
+			       SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+			       SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES)
+		.fixups = &octaflash_fixups },
+	{ "mx25uw12345g", INFO(0xc28438, 0, 4 * 1024, 4096,
+			       SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+			       SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES)
+		.fixups = &octaflash_fixups },
+	{ "mx25uw6445g", INFO(0xc28137, 0, 2 * 1024, 4096,
+			      SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+			      SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES)
+		.fixups = &octaflash_fixups },
+	{ "mx25uw6345g", INFO(0xc28437, 0, 2 * 1024, 4096,
+			      SECT_4K | SPI_NOR_OCTAL_DTR_READ |
+			      SPI_NOR_OCTAL_DTR_PP | SPI_NOR_4B_OPCODES)
+		.fixups = &octaflash_fixups },
 };
 
 static void macronix_default_init(struct spi_nor *nor)
-- 
1.9.1




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux