When device properties are supplied to the devices, in reality a software fwnode that holds those properties is created which is then assigned to the device. If the device properties are constant the software node can also be constant. Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx> Cc: Daniel Mack <daniel@xxxxxxxxxx> Cc: Haojian Zhuang <haojian.zhuang@xxxxxxxxx> Cc: Robert Jarzmik <robert.jarzmik@xxxxxxx> --- arch/arm/mach-pxa/icontrol.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index 151e26ec06968..04a12523cdee0 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -74,13 +74,17 @@ static const struct property_entry mcp251x_properties[] = { {} }; +static const struct software_node mcp251x_node = { + .properties = mcp251x_properties, +}; + static struct spi_board_info mcp251x_board_info[] = { { .modalias = "mcp2515", .max_speed_hz = 6500000, .bus_num = 3, .chip_select = 0, - .properties = mcp251x_properties, + .swnode = &mcp251x_node, .controller_data = &mcp251x_chip_info1, .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ1) }, @@ -89,7 +93,7 @@ static struct spi_board_info mcp251x_board_info[] = { .max_speed_hz = 6500000, .bus_num = 3, .chip_select = 1, - .properties = mcp251x_properties, + .swnode = &mcp251x_node, .controller_data = &mcp251x_chip_info2, .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ2) }, @@ -98,7 +102,7 @@ static struct spi_board_info mcp251x_board_info[] = { .max_speed_hz = 6500000, .bus_num = 4, .chip_select = 0, - .properties = mcp251x_properties, + .swnode = &mcp251x_node, .controller_data = &mcp251x_chip_info3, .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ3) }, @@ -107,7 +111,7 @@ static struct spi_board_info mcp251x_board_info[] = { .max_speed_hz = 6500000, .bus_num = 4, .chip_select = 1, - .properties = mcp251x_properties, + .swnode = &mcp251x_node, .controller_data = &mcp251x_chip_info4, .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ4) } -- 2.30.1