[PATCH 1/2] spi: altera: fix return value for altera_spi_txrx()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch fixes the return value for altera_spi_txrx. It should return
1 for interrupt transfer mode, and return 0 for polling transfer mode.

The altera_spi_txrx() implements the spi_controller.transfer_one
callback. According to the spi-summary.rst, the transfer_one should
return 0 when transfer is finished, return 1 when transfer is still in
progress.

Signed-off-by: Xu Yilun <yilun.xu@xxxxxxxxx>
---
 drivers/spi/spi-altera.c | 26 ++++++++++++++------------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/spi/spi-altera.c b/drivers/spi/spi-altera.c
index 809bfff..cbc4c28 100644
--- a/drivers/spi/spi-altera.c
+++ b/drivers/spi/spi-altera.c
@@ -189,24 +189,26 @@ static int altera_spi_txrx(struct spi_master *master,
 
 		/* send the first byte */
 		altera_spi_tx_word(hw);
-	} else {
-		while (hw->count < hw->len) {
-			altera_spi_tx_word(hw);
 
-			for (;;) {
-				altr_spi_readl(hw, ALTERA_SPI_STATUS, &val);
-				if (val & ALTERA_SPI_STATUS_RRDY_MSK)
-					break;
+		return 1;
+	}
+
+	while (hw->count < hw->len) {
+		altera_spi_tx_word(hw);
 
-				cpu_relax();
-			}
+		for (;;) {
+			altr_spi_readl(hw, ALTERA_SPI_STATUS, &val);
+			if (val & ALTERA_SPI_STATUS_RRDY_MSK)
+				break;
 
-			altera_spi_rx_word(hw);
+			cpu_relax();
 		}
-		spi_finalize_current_transfer(master);
+
+		altera_spi_rx_word(hw);
 	}
+	spi_finalize_current_transfer(master);
 
-	return t->len;
+	return 0;
 }
 
 static irqreturn_t altera_spi_irq(int irq, void *dev)
-- 
2.7.4




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux