[PATCH 4/7] spi: cadence-quadspi: Fix dummy cycle calculation when buswidth > 1

[Pratyush Yadav <p.yadav@xxxxxx>]

SPI MEM deals with dummy bytes but the controller deals with dummy
cycles. Multiplying bytes by 8 is correct if the dummy phase uses 1S
mode since 1 byte will be sent in 8 cycles. But if the dummy phase uses
4S mode then 1 byte will be sent in 2 cycles.

To correctly translate dummy bytes to dummy cycles, the dummy buswidth
also needs to be taken into account. Divide 8 by the buswidth to get the
correct multiplier for getting the number of cycles.

Signed-off-by: Pratyush Yadav <p.yadav@xxxxxx>
---
 drivers/spi/spi-cadence-quadspi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index 6a778014ff60..376abef43530 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -294,7 +294,7 @@ static unsigned int cqspi_calc_dummy(const struct spi_mem_op *op)
 {
 	unsigned int dummy_clk;
 
-	dummy_clk = op->dummy.nbytes * 8;
+	dummy_clk = op->dummy.nbytes * (8 / op->dummy.buswidth);
 
 	return dummy_clk;
 }
-- 
2.28.0