This patch adds YAML based device tree binding document for Tegra Quad SPI driver. Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx> --- .../bindings/spi/nvidia,tegra210-quad.yaml | 130 +++++++++++++++++++++ 1 file changed, 130 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml new file mode 100644 index 0000000..0b5fea6 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/nvidia,tegra210-quad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra Quad SPI Controller + +maintainers: + - Thierry Reding <thierry.reding@xxxxxxxxx> + - Jonathan Hunter <jonathanh@xxxxxxxxxx> + +properties: + compatible: + enum: + - nvidia,tegra210-qspi + - nvidia,tegra186-qspi + - nvidia,tegra194-qspi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-names: + items: + - const: qspi + - const: qspi_out + + clocks: + maxItems: 2 + + resets: + maxItems: 1 + + dmas: + maxItems: 2 + + dma-names: + items: + - const: rx + - const: tx + +patternProperties: + "^.*@[0-9a-f]+": + type: object + + properties: + compatible: + description: + Compatible of the SPI device. + + reg: + maxItems: 1 + + spi-max-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Maximum Quad SPI clocking speed of the device in Hz. + + spi-rx-bus-width: + description: + Bus width to the Quad SPI bus used for read transfers. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4] + + spi-tx-bus-width: + description: + Bus width to the Quad SPI bus used for write transfers. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4] + + nvidia,tx-clk-tap-delay: + description: + Delays the clock going out to device with this tap value. + Tap value varies based on platform design trace lengths from Tegra + QSPI to corresponding slave device. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + + nvidia,rx-clk-tap-delay: + description: + Delays the clock coming in from the device with this tap value. + Tap value varies based on platform design trace lengths from Tegra + QSPI to corresponding slave device. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + + required: + - reg + +required: + - compatible + - reg + - interrupts + - clock-names + - clocks + - resets + +additionalProperties: true + +examples: + - | + #include <dt-bindings/clock/tegra210-car.h> + #include <dt-bindings/reset/tegra210-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + spi@70410000 { + compatible = "nvidia,tegra210-qspi"; + reg = <0x70410000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA210_CLK_QSPI>, + <&tegra_car TEGRA210_CLK_QSPI_PM>; + clock-names = "qspi", "qspi_out"; + resets = <&tegra_car 211>; + dmas = <&apbdma 5>, <&apbdma 5>; + dma-names = "rx", "tx"; + + flash@0 { + compatible = "spi-nor"; + reg = <0>; + spi-max-frequency = <104000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; + }; -- 2.7.4