This fixes the following warning during dtbs_check: --- spi@13000: clock-names: Additional items are not allowed ('pclk' was unexpected) spi@13000: clock-names: ['core', 'pclk'] is too long spi@13000: clocks: [[2, 23], [2, 258]] is too long spi@15000: clock-names: Additional items are not allowed ('pclk' was unexpected) spi@15000: clock-names: ['core', 'pclk'] is too long spi@15000: clocks: [[2, 29], [2, 261]] is too long --- Conditional schema properties don't overwrite others. Instead of restrictions have to be validated. So general clock amount is 1-2 and depending on the actual device type limit the mount to 1 or 2. Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxx> --- .../bindings/spi/amlogic,meson-gx-spicc.yaml | 26 ++++++++++++------- 1 file changed, 17 insertions(+), 9 deletions(-) diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml index 9147df29022a..38efb50081e3 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml @@ -34,12 +34,15 @@ properties: maxItems: 1 clocks: - maxItems: 1 + minItems: 1 + maxItems: 2 + items: + - description: controller register bus clock + - description: baud rate generator and delay control clock clock-names: - description: input clock for the baud rate generator - items: - - const: core + minItems: 1 + maxItems: 2 if: properties: @@ -51,17 +54,22 @@ if: then: properties: clocks: - contains: - items: - - description: controller register bus clock - - description: baud rate generator and delay control clock + minItems: 2 clock-names: - minItems: 2 items: - const: core - const: pclk +else: + properties: + clocks: + maxItems: 1 + + clock-names: + items: + - const: core + required: - compatible - reg -- 2.27.0