Re: [PATCH 04/10] dt-bindings: spi: Add bindings for spi-dw-mchp

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Serge Semin writes:

> On Wed, May 13, 2020 at 04:00:25PM +0200, Lars Povlsen wrote:
>> This add DT bindings for the Microsemi/Microchip SPI controller used
>> in various SoC's. It describes the "mscc,ocelot-spi" and
>> "mscc,jaguar2-spi" bindings.
>
> As I see it, there is no need in this patch at all. Current DT binding file
> describes the MSCC version of the DW APB SSI IP pretty well. You can add an
> example to the DT schema though with "mscc,ocelot-spi" or "mscc,jaguar2-spi"
> compatible string and additional registers range.
>

Fine by me. I just had the understanding that a YAML binding had to be
given for a new driver.

I will add the bindings to the existing YAML with proper guards.

---Lars

> -Sergey
>
>>
>> Reviewed-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
>> Signed-off-by: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
>> ---
>>  .../bindings/spi/mscc,ocelot-spi.yaml         | 60 +++++++++++++++++++
>>  .../bindings/spi/snps,dw-apb-ssi.txt          |  7 +--
>>  MAINTAINERS                                   |  1 +
>>  3 files changed, 63 insertions(+), 5 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/spi/mscc,ocelot-spi.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/spi/mscc,ocelot-spi.yaml b/Documentation/devicetree/bindings/spi/mscc,ocelot-spi.yaml
>> new file mode 100644
>> index 0000000000000..a3ac0fa576553
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/spi/mscc,ocelot-spi.yaml
>> @@ -0,0 +1,60 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: "http://devicetree.org/schemas/spi/mscc,ocelot-spi.yaml#";
>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
>> +
>> +title: Microsemi Vcore-III SPI Communication Controller
>> +
>> +maintainers:
>> +  - Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
>> +  - Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
>> +
>> +allOf:
>> +  - $ref: "spi-controller.yaml#"
>> +
>> +description: |
>> +  The Microsemi Vcore-III SPI controller is a general purpose SPI
>> +  controller based upon the Designware SPI controller. It uses an 8
>> +  byte rx/tx fifo.
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - mscc,ocelot-spi
>> +      - mscc,jaguar2-spi
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  reg:
>> +    minItems: 2
>> +    items:
>> +      - description: Designware SPI registers
>> +      - description: CS override registers
>> +
>> +  clocks:
>> +    maxItems: 1
>> +
>> +  reg-io-width:
>> +    description: |
>> +      The I/O register width (in bytes) implemented by this device.
>> +    items:
>> +       enum: [ 2, 4 ]
>> +    maxItems: 1
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - clocks
>> +
>> +examples:
>> +  - |
>> +    spi0: spi@101000 {
>> +      compatible = "mscc,ocelot-spi";
>> +      #address-cells = <1>;
>> +      #size-cells = <0>;
>> +      reg = <0x101000 0x100>, <0x3c 0x18>;
>> +      interrupts = <9>;
>> +      clocks = <&ahb_clk>;
>> +    };
>> diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
>> index 3ed08ee9feba4..5e1849be7bae5 100644
>> --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
>> +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
>> @@ -1,10 +1,8 @@
>>  Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface.
>>
>>  Required properties:
>> -- compatible : "snps,dw-apb-ssi" or "mscc,<soc>-spi", where soc is "ocelot" or
>> -  "jaguar2", or "amazon,alpine-dw-apb-ssi"
>> -- reg : The register base for the controller. For "mscc,<soc>-spi", a second
>> -  register set is required (named ICPU_CFG:SPI_MST)
>> +- compatible : "snps,dw-apb-ssi" or "amazon,alpine-dw-apb-ssi"
>> +- reg : The register base for the controller.
>>  - interrupts : One interrupt, used by the controller.
>>  - #address-cells : <1>, as required by generic SPI binding.
>>  - #size-cells : <0>, also as required by generic SPI binding.
>> @@ -38,4 +36,3 @@ Example:
>>               cs-gpios = <&gpio0 13 0>,
>>                          <&gpio0 14 0>;
>>       };
>> -
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 1db598723a1d8..6472240b8391b 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -11231,6 +11231,7 @@ L:    linux-mips@xxxxxxxxxxxxxxx
>>  S:   Supported
>>  F:   Documentation/devicetree/bindings/mips/mscc.txt
>>  F:   Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
>> +F:   Documentation/devicetree/bindings/spi/mscc,ocelot-spi.yaml
>>  F:   arch/mips/boot/dts/mscc/
>>  F:   arch/mips/configs/generic/board-ocelot.config
>>  F:   arch/mips/generic/board-ocelot.c
>> --
>> 2.26.2
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
Lars Povlsen,
Microchip



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux