[PATCH AUTOSEL 4.9 09/50] spi: dw: Enable interrupts in accordance with DMA xfer mode

[Sasha Levin <sashal@xxxxxxxxxx>]

From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>

[ Upstream commit 43dba9f3f98c2b184a19f856f06fe22817bfd9e0 ]

It's pointless to track the Tx overrun interrupts if Rx-only SPI
transfer is issued. Similarly there is no need in handling the Rx
overrun/underrun interrupts if Tx-only SPI transfer is executed.
So lets unmask the interrupts only if corresponding SPI
transactions are implied.

Co-developed-by: Georgy Vlasov <Georgy.Vlasov@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Georgy Vlasov <Georgy.Vlasov@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
Cc: Ramil Zaripov <Ramil.Zaripov@xxxxxxxxxxxxxxxxxxxx>
Cc: Alexey Malahov <Alexey.Malahov@xxxxxxxxxxxxxxxxxxxx>
Cc: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
Cc: Paul Burton <paulburton@xxxxxxxxxx>
Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Cc: Arnd Bergmann <arnd@xxxxxxxx>
Cc: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: linux-mips@xxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
Link: https://lore.kernel.org/r/20200522000806.7381-3-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/spi/spi-dw-mid.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index f77d03b658ab..fe0ca3848d35 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -228,19 +228,23 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,
 
 static int mid_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer)
 {
-	u16 dma_ctrl = 0;
+	u16 imr = 0, dma_ctrl = 0;
 
 	dw_writel(dws, DW_SPI_DMARDLR, 0xf);
 	dw_writel(dws, DW_SPI_DMATDLR, 0x10);
 
-	if (xfer->tx_buf)
+	if (xfer->tx_buf) {
 		dma_ctrl |= SPI_DMA_TDMAE;
-	if (xfer->rx_buf)
+		imr |= SPI_INT_TXOI;
+	}
+	if (xfer->rx_buf) {
 		dma_ctrl |= SPI_DMA_RDMAE;
+		imr |= SPI_INT_RXUI | SPI_INT_RXOI;
+	}
 	dw_writel(dws, DW_SPI_DMACR, dma_ctrl);
 
 	/* Set the interrupt mask */
-	spi_umask_intr(dws, SPI_INT_TXOI | SPI_INT_RXUI | SPI_INT_RXOI);
+	spi_umask_intr(dws, imr);
 
 	dws->transfer_handler = dma_transfer;
 
-- 
2.25.1