Re: [PATCH v2] spi: bcm2835: Enable shared interrupt support

[Lukas Wunner <lukas@xxxxxxxxx>]

On Thu, Jun 04, 2020 at 02:28:19PM -0700, Florian Fainelli wrote:
> The 4 SPI controller instances added in BCM2711 and BCM7211 SoCs (SPI3,
> SPI4, SPI5 and SPI6) share the same interrupt line with SPI0.
> 
> For the BCM2835 case which is deemed performance critical, we would like
> to continue using an interrupt handler which does not have the extra
> comparison on BCM2835_SPI_CS_INTR.
> 
> To support that requirement the common interrupt handling code between
> the shared and non-shared interrupt paths is split into a
> bcm2835_spi_interrupt_common() and both bcm2835_spi_interrupt() as well
> as bcm2835_spi_shared_interrupt() make use of it.
> 
> During probe, we determine if there is at least another instance of this
> SPI controller, and if there is, then we install a shared interrupt
> handler.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>

Reviewed-by: Lukas Wunner <lukas@xxxxxxxxx>