[PATCH v2 2/2] spi: dw: Refactor mid_spi_dma_setup() to separate DMA and IRQ config

[Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>]

It's better to understand what bits are set for DMA and for IRQ handling
in mid_spi_dma_setup() if they are grouped accordingly. Thus,
refactor mid_spi_dma_setup() to separate DMA and IRQ configuration.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
v2: rebased against latest spi/for-next

 drivers/spi/spi-dw-dma.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi-dw-dma.c b/drivers/spi/spi-dw-dma.c
index 53d5257662e8..5986c520b196 100644
--- a/drivers/spi/spi-dw-dma.c
+++ b/drivers/spi/spi-dw-dma.c
@@ -375,17 +375,17 @@ static int dw_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer)
 	dw_writel(dws, DW_SPI_DMARDLR, dws->rxburst - 1);
 	dw_writel(dws, DW_SPI_DMATDLR, dws->fifo_len - dws->txburst);
 
-	if (xfer->tx_buf) {
+	if (xfer->tx_buf)
 		dma_ctrl |= SPI_DMA_TDMAE;
-		imr |= SPI_INT_TXOI;
-	}
-	if (xfer->rx_buf) {
+	if (xfer->rx_buf)
 		dma_ctrl |= SPI_DMA_RDMAE;
-		imr |= SPI_INT_RXUI | SPI_INT_RXOI;
-	}
 	dw_writel(dws, DW_SPI_DMACR, dma_ctrl);
 
 	/* Set the interrupt mask */
+	if (xfer->tx_buf)
+		imr |= SPI_INT_TXOI;
+	if (xfer->rx_buf)
+		imr |= SPI_INT_RXUI | SPI_INT_RXOI;
 	spi_umask_intr(dws, imr);
 
 	reinit_completion(&dws->dma_completion);
-- 
2.26.2