[PATCH v6 1/9] ARM: dts: stm32: Add dma config for spi5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: dillon min <dillon.minfei@xxxxxxxxx>

Enable spi5's dma configuration. for graphics data output to
ilitek ili9341 panel via mipi dbi interface

Signed-off-by: dillon min <dillon.minfei@xxxxxxxxx>
---
 arch/arm/boot/dts/stm32f429.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index d7770699feb5..5820b11e7365 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -660,6 +660,9 @@
 			reg = <0x40015000 0x400>;
 			interrupts = <85>;
 			clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI5)>;
+			dmas = <&dma2 3 2 0x400 0x0>,
+				<&dma2 4 2 0x400 0x0>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
-- 
2.7.4




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux