Reduce devm_ioremap size to (4 * AHB_BUFER_SIZE) rather than mapping complete QSPI-Memmory as driver is now independent of flash size. Flash of any size can be accessed. Issue was reported on platform where devm_ioremap failure is observed with size > 256M. Error log on LS1021ATWR : fsl-quadspi 1550000.spi: ioremap failed for resource [mem 0x40000000-0x7fffffff] fsl-quadspi 1550000.spi: Freescale QuadSPI probe failed fsl-quadspi: probe of 1550000.spi failed with error -12 This change was also suggested previously: https://patchwork.kernel.org/patch/10508753/#22166385 Suggested-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx> Signed-off-by: Kuldeep Singh <kuldeep.singh@xxxxxxx> Signed-off-by: Ashish Kumar <Ashish.kumar@xxxxxxx> --- v3: Update comment v2: Add Suggested-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx> Incorrporate review comments from Frieder drivers/spi/spi-fsl-qspi.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/spi/spi-fsl-qspi.c b/drivers/spi/spi-fsl-qspi.c index 63c9f7e..8b95e2f 100644 --- a/drivers/spi/spi-fsl-qspi.c +++ b/drivers/spi/spi-fsl-qspi.c @@ -859,14 +859,15 @@ static int fsl_qspi_probe(struct platform_device *pdev) res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "QuadSPI-memory"); - q->ahb_addr = devm_ioremap_resource(dev, res); + q->memmap_phy = res->start; + /* Since there are 4 cs, map size required is 4 times ahb_buf_size */ + q->ahb_addr = devm_ioremap(dev, q->memmap_phy, + (q->devtype_data->ahb_buf_size * 4)); if (IS_ERR(q->ahb_addr)) { ret = PTR_ERR(q->ahb_addr); goto err_put_ctrl; } - q->memmap_phy = res->start; - /* find the clocks */ q->clk_en = devm_clk_get(dev, "qspi_en"); if (IS_ERR(q->clk_en)) { -- 2.7.4