RE: [PATCH v7 00/13] add ecspi ERR009165 for i.mx6/7 soc family

[Robin Gong <yibin.gong@xxxxxxx>]

Ping....
On 2020/03/11 16:35 Robin Gong <yibin.gong@xxxxxxx> wrote:
> There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO transfer to
> be send twice in DMA mode. Please get more information from:
> https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf. The workaround is
> adding new sdma ram script which works in XCH  mode as PIO inside sdma
> instead of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0. The issue
> should be exist on all legacy i.mx6/7 soc family before i.mx6ul.
> NXP fix this design issue from i.mx6ul, so newer chips including i.mx6ul/
> 6ull/6sll do not need this workaroud anymore. All other i.mx6/7/8 chips still
> need this workaroud. This patch set add new 'fsl,imx6ul-ecspi'
> for ecspi driver and 'ecspi_fixed' in sdma driver to choose if need errata or not.
> The first two reverted patches should be the same issue, though, it seems
> 'fixed' by changing to other shp script. Hope Sean or Sascha could have the
> chance to test this patch set if could fix their issues.
> Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not work on
> i.mx8mm because the event id is zero.
> 
> PS:
>    Please get sdma firmware from below linux-firmware and copy it to your
> local rootfs /lib/firmware/imx/sdma.
> https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tr
> ee/imx/sdma
> 
> v2:
>   1.Add commit log for reverted patches.
>   2.Add comment for 'ecspi_fixed' in sdma driver.
>   3.Add 'fsl,imx6sll-ecspi' compatible instead of 'fsl,imx6ul-ecspi'
>     rather than remove.
> v3:
>   1.Confirm with design team make sure ERR009165 fixed on i.mx6ul/i.mx6ull
>     /i.mx6sll, not fixed on i.mx8m/8mm and other i.mx6/7 legacy chips.
>     Correct dts related dts patch in v2.
>   2.Clean eratta information in binding doc and new 'tx_glitch_fixed' flag
>     in spi-imx driver to state ERR009165 fixed or not.
>   3.Enlarge burst size to fifo size for tx since tx_wml set to 0 in the
>     errata workaroud, thus improve performance as possible.
> v4:
>   1.Add Ack tag from Mark and Vinod
>   2.Remove checking 'event_id1' zero as 'event_id0'.
> v5:
>   1.Add the last patch for compatible with the current uart driver which
>     using rom script, so both uart ram script and rom script supported
>     in latest firmware, by default uart rom script used. UART driver
>     will be broken without this patch.
> v6:
>   1.Resend after rebase the latest next branch.
>   2.Remove below No.13~No.15 patches of v5 because they were mergered.
>   	ARM: dts: imx6ul: add dma support on ecspi
>   	ARM: dts: imx6sll: correct sdma compatible
>   	arm64: defconfig: Enable SDMA on i.mx8mq/8mm
>   3.Revert "dmaengine: imx-sdma: fix context cache" since
>     'context_loaded' removed.
> v7:
>   1.Put the last patch 13/13 'Revert "dmaengine: imx-sdma: fix context
>     cache"' to the ahead of 03/13 'Revert "dmaengine: imx-sdma: refine
>     to load context only once" so that no building waring during comes out
>     during bisect.
>   2.Address Sascha's comments, including eliminating any i.mx6sx in this
>     series, adding new 'is_imx6ul_ecspi()' instead imx in imx51 and taking
>     care SMC bit for PIO.
>   3.Add back missing 'Reviewed-by' tag on 08/15(v5):09/13(v7)
>    'spi: imx: add new i.mx6ul compatible name in binding doc'
> 
> Robin Gong (13):
>   Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
>   Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
>   Revert "dmaengine: imx-sdma: fix context cache"
>   Revert "dmaengine: imx-sdma: refine to load context only once"
>   dmaengine: imx-sdma: remove dupilicated sdma_load_context
>   dmaengine: imx-sdma: add mcu_2_ecspi script
>   spi: imx: fix ERR009165
>   spi: imx: remove ERR009165 workaround on i.mx6ul
>   spi: imx: add new i.mx6ul compatible name in binding doc
>   dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
>   dma: imx-sdma: add i.mx6ul compatible name
>   dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
>   dmaengine: imx-sdma: add uart rom script
> 
>  .../devicetree/bindings/dma/fsl-imx-sdma.txt       |  1 +
>  .../devicetree/bindings/spi/fsl-imx-cspi.txt       |  1 +
>  arch/arm/boot/dts/imx6q.dtsi                       |  2 +-
>  arch/arm/boot/dts/imx6qdl.dtsi                     |  8 +--
>  drivers/dma/imx-sdma.c                             | 67
> ++++++++++++++--------
>  drivers/spi/spi-imx.c                              | 61
> +++++++++++++++++---
>  include/linux/platform_data/dma-imx-sdma.h         |  8 ++-
>  7 files changed, 108 insertions(+), 40 deletions(-)
> 
> --
> 2.7.4