The patch spi: meson-spicc: add a linear clock divider support has been applied to the spi tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 3e0cf4d3fc2985beee011e9a1bbb8374fc02c0a0 Mon Sep 17 00:00:00 2001 From: Sunny Luo <sunny.luo@xxxxxxxxxxx> Date: Thu, 12 Mar 2020 14:31:25 +0100 Subject: [PATCH] spi: meson-spicc: add a linear clock divider support The SPICC controller in Meson-AXG SoC is capable of using a linear clock divider to reach a much fine tuned range of clocks, while the old controller only use a power of two clock divider, result at a more coarse clock range. Also convert the clock registration into Common Clock Framework. Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> Signed-off-by: Yixun Lan <yixun.lan@xxxxxxxxxxx> Signed-off-by: Sunny Luo <sunny.luo@xxxxxxxxxxx> Link: https://lore.kernel.org/r/20200312133131.26430-4-narmstrong@xxxxxxxxxxxx Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- drivers/spi/Kconfig | 1 + drivers/spi/spi-meson-spicc.c | 204 +++++++++++++++++++++++++++------- 2 files changed, 165 insertions(+), 40 deletions(-) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index c33ca96b44de..efce98e9844e 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -428,6 +428,7 @@ config SPI_FSL_ESPI config SPI_MESON_SPICC tristate "Amlogic Meson SPICC controller" + depends on COMMON_CLK depends on ARCH_MESON || COMPILE_TEST help This enables master mode support for the SPICC (SPI communication diff --git a/drivers/spi/spi-meson-spicc.c b/drivers/spi/spi-meson-spicc.c index ba70ef94a82a..bd434d9055d9 100644 --- a/drivers/spi/spi-meson-spicc.c +++ b/drivers/spi/spi-meson-spicc.c @@ -116,6 +116,9 @@ #define SPICC_DWADDR 0x24 /* Write Address of DMA */ #define SPICC_ENH_CTL0 0x38 /* Enhanced Feature */ +#define SPICC_ENH_CLK_CS_DELAY_MASK GENMASK(15, 0) +#define SPICC_ENH_DATARATE_MASK GENMASK(23, 16) +#define SPICC_ENH_DATARATE_EN BIT(24) #define SPICC_ENH_MOSI_OEN BIT(25) #define SPICC_ENH_CLK_OEN BIT(26) #define SPICC_ENH_CS_OEN BIT(27) @@ -130,6 +133,7 @@ struct meson_spicc_data { bool has_oen; + bool has_enhance_clk_div; }; struct meson_spicc_device { @@ -137,6 +141,7 @@ struct meson_spicc_device { struct platform_device *pdev; void __iomem *base; struct clk *core; + struct clk *clk; struct spi_message *message; struct spi_transfer *xfer; const struct meson_spicc_data *data; @@ -322,40 +327,6 @@ static irqreturn_t meson_spicc_irq(int irq, void *data) return IRQ_HANDLED; } -static u32 meson_spicc_setup_speed(struct meson_spicc_device *spicc, u32 conf, - u32 speed) -{ - unsigned long parent, value; - unsigned int i, div; - - parent = clk_get_rate(spicc->core); - - /* Find closest inferior/equal possible speed */ - for (i = 0 ; i < 7 ; ++i) { - /* 2^(data_rate+2) */ - value = parent >> (i + 2); - - if (value <= speed) - break; - } - - /* If provided speed it lower than max divider, use max divider */ - if (i > 7) { - div = 7; - dev_warn_once(&spicc->pdev->dev, "unable to get close to speed %u\n", - speed); - } else - div = i; - - dev_dbg(&spicc->pdev->dev, "parent %lu, speed %u -> %lu (%u)\n", - parent, speed, value, div); - - conf &= ~SPICC_DATARATE_MASK; - conf |= FIELD_PREP(SPICC_DATARATE_MASK, div); - - return conf; -} - static void meson_spicc_setup_xfer(struct meson_spicc_device *spicc, struct spi_transfer *xfer) { @@ -364,9 +335,6 @@ static void meson_spicc_setup_xfer(struct meson_spicc_device *spicc, /* Read original configuration */ conf = conf_orig = readl_relaxed(spicc->base + SPICC_CONREG); - /* Select closest divider */ - conf = meson_spicc_setup_speed(spicc, conf, xfer->speed_hz); - /* Setup word width */ conf &= ~SPICC_BITLENGTH_MASK; conf |= FIELD_PREP(SPICC_BITLENGTH_MASK, @@ -375,6 +343,8 @@ static void meson_spicc_setup_xfer(struct meson_spicc_device *spicc, /* Ignore if unchanged */ if (conf != conf_orig) writel_relaxed(conf, spicc->base + SPICC_CONREG); + + clk_set_rate(spicc->clk, xfer->speed_hz); } static int meson_spicc_transfer_one(struct spi_master *master, @@ -481,9 +451,6 @@ static int meson_spicc_unprepare_transfer(struct spi_master *master) /* Disable all IRQs */ writel(0, spicc->base + SPICC_INTREG); - /* Disable controller */ - writel_bits_relaxed(SPICC_ENABLE, 0, spicc->base + SPICC_CONREG); - device_reset_optional(&spicc->pdev->dev); return 0; @@ -502,6 +469,152 @@ static void meson_spicc_cleanup(struct spi_device *spi) spi->controller_state = NULL; } +/* + * The Clock Mux + * x-----------------x x------------x x------\ + * |---| pow2 fixed div |---| pow2 div |----| | + * | x-----------------x x------------x | | + * src ---| | mux |-- out + * | x-----------------x x------------x | | + * |---| enh fixed div |---| enh div |0---| | + * x-----------------x x------------x x------/ + * + * Clk path for GX series: + * src -> pow2 fixed div -> pow2 div -> out + * + * Clk path for AXG series: + * src -> pow2 fixed div -> pow2 div -> mux -> out + * src -> enh fixed div -> enh div -> mux -> out + */ + +static int meson_spicc_clk_init(struct meson_spicc_device *spicc) +{ + struct device *dev = &spicc->pdev->dev; + struct clk_fixed_factor *pow2_fixed_div, *enh_fixed_div; + struct clk_divider *pow2_div, *enh_div; + struct clk_mux *mux; + struct clk_init_data init; + struct clk *clk; + struct clk_parent_data parent_data[2]; + char name[64]; + + memset(&init, 0, sizeof(init)); + memset(&parent_data, 0, sizeof(parent_data)); + + init.parent_data = parent_data; + + /* algorithm for pow2 div: rate = freq / 4 / (2 ^ N) */ + + pow2_fixed_div = devm_kzalloc(dev, sizeof(*pow2_fixed_div), GFP_KERNEL); + if (!pow2_fixed_div) + return -ENOMEM; + + snprintf(name, sizeof(name), "%s#pow2_fixed_div", dev_name(dev)); + init.name = name; + init.ops = &clk_fixed_factor_ops; + init.flags = 0; + parent_data[0].hw = __clk_get_hw(spicc->core); + init.num_parents = 1; + + pow2_fixed_div->mult = 1, + pow2_fixed_div->div = 4, + pow2_fixed_div->hw.init = &init; + + clk = devm_clk_register(dev, &pow2_fixed_div->hw); + if (WARN_ON(IS_ERR(clk))) + return PTR_ERR(clk); + + pow2_div = devm_kzalloc(dev, sizeof(*pow2_div), GFP_KERNEL); + if (!pow2_div) + return -ENOMEM; + + snprintf(name, sizeof(name), "%s#pow2_div", dev_name(dev)); + init.name = name; + init.ops = &clk_divider_ops; + init.flags = CLK_SET_RATE_PARENT; + parent_data[0].hw = &pow2_fixed_div->hw; + init.num_parents = 1; + + pow2_div->shift = 16, + pow2_div->width = 3, + pow2_div->flags = CLK_DIVIDER_POWER_OF_TWO, + pow2_div->reg = spicc->base + SPICC_CONREG; + pow2_div->hw.init = &init; + + clk = devm_clk_register(dev, &pow2_div->hw); + if (WARN_ON(IS_ERR(clk))) + return PTR_ERR(clk); + + if (!spicc->data->has_enhance_clk_div) { + spicc->clk = clk; + return 0; + } + + /* algorithm for enh div: rate = freq / 2 / (N + 1) */ + + enh_fixed_div = devm_kzalloc(dev, sizeof(*enh_fixed_div), GFP_KERNEL); + if (!enh_fixed_div) + return -ENOMEM; + + snprintf(name, sizeof(name), "%s#enh_fixed_div", dev_name(dev)); + init.name = name; + init.ops = &clk_fixed_factor_ops; + init.flags = 0; + parent_data[0].hw = __clk_get_hw(spicc->core); + init.num_parents = 1; + + enh_fixed_div->mult = 1, + enh_fixed_div->div = 2, + enh_fixed_div->hw.init = &init; + + clk = devm_clk_register(dev, &enh_fixed_div->hw); + if (WARN_ON(IS_ERR(clk))) + return PTR_ERR(clk); + + enh_div = devm_kzalloc(dev, sizeof(*enh_div), GFP_KERNEL); + if (!enh_div) + return -ENOMEM; + + snprintf(name, sizeof(name), "%s#enh_div", dev_name(dev)); + init.name = name; + init.ops = &clk_divider_ops; + init.flags = CLK_SET_RATE_PARENT; + parent_data[0].hw = &enh_fixed_div->hw; + init.num_parents = 1; + + enh_div->shift = 16, + enh_div->width = 8, + enh_div->reg = spicc->base + SPICC_ENH_CTL0; + enh_div->hw.init = &init; + + clk = devm_clk_register(dev, &enh_div->hw); + if (WARN_ON(IS_ERR(clk))) + return PTR_ERR(clk); + + mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); + if (!mux) + return -ENOMEM; + + snprintf(name, sizeof(name), "%s#sel", dev_name(dev)); + init.name = name; + init.ops = &clk_mux_ops; + parent_data[0].hw = &pow2_div->hw; + parent_data[1].hw = &enh_div->hw; + init.num_parents = 2; + init.flags = CLK_SET_RATE_PARENT; + + mux->mask = 0x1, + mux->shift = 24, + mux->reg = spicc->base + SPICC_ENH_CTL0; + mux->hw.init = &init; + + spicc->clk = devm_clk_register(dev, &mux->hw); + if (WARN_ON(IS_ERR(spicc->clk))) + return PTR_ERR(spicc->clk); + + return 0; +} + static int meson_spicc_probe(struct platform_device *pdev) { struct spi_master *master; @@ -533,6 +646,10 @@ static int meson_spicc_probe(struct platform_device *pdev) goto out_master; } + /* Set master mode and enable controller */ + writel_relaxed(SPICC_ENABLE | SPICC_MODE_MASTER, + spicc->base + SPICC_CONREG); + /* Disable all IRQs */ writel_relaxed(0, spicc->base + SPICC_INTREG); @@ -584,6 +701,12 @@ static int meson_spicc_probe(struct platform_device *pdev) meson_spicc_oen_enable(spicc); + ret = meson_spicc_clk_init(spicc); + if (ret) { + dev_err(&pdev->dev, "clock registration failed\n"); + goto out_master; + } + ret = devm_spi_register_master(&pdev->dev, master); if (ret) { dev_err(&pdev->dev, "spi master registration failed\n"); @@ -618,6 +741,7 @@ static const struct meson_spicc_data meson_spicc_gx_data = { static const struct meson_spicc_data meson_spicc_axg_data = { .has_oen = true, + .has_enhance_clk_div = true, }; static const struct of_device_id meson_spicc_of_match[] = { -- 2.20.1