Am 2020-03-09 15:56, schrieb Vladimir Oltean:
From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
LS1028A has a functional connection to the eDMA module. Even if the
spi-fsl-dspi.c driver is not using DMA for LS1028A now, define the
slots
in the DMAMUX for connecting the eDMA channels to the 3 DSPI
controllers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 515e0a1b934f..18155273a46e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -298,6 +298,8 @@
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
clocks = <&clockgen 4 1>;
+ dmas = <&edma0 0 62>, <&edma0 0 60>;
+ dma-names = "tx", "rx";
minor nit. Other nodes specified the dma channels as
dma-names = "tx", "rx";
dmas = <&edma0 0 62>,
<&edma0 0 60>;
-michael
spi-num-chipselects = <4>;
little-endian;
status = "disabled";
@@ -311,6 +313,8 @@
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
clocks = <&clockgen 4 1>;
+ dmas = <&edma0 0 58>, <&edma0 0 56>;
+ dma-names = "tx", "rx";
spi-num-chipselects = <4>;
little-endian;
status = "disabled";
@@ -324,6 +328,8 @@
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
clocks = <&clockgen 4 1>;
+ dmas = <&edma0 0 54>, <&edma0 0 2>;
+ dma-names = "tx", "rx";
spi-num-chipselects = <3>;
little-endian;
status = "disabled";
