Re: [PATCH 2/2] spi: spidev: fix a max speed setting

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Feb 20, 2020 at 02:11:51PM +0000, Oleksandr Suvorov wrote:
> SPI_IOC_WR_MAX_SPEED_HZ command always sets spi->max_speed_hz
> to the initial value come from DT.

This is intentional.  It's doing a call to spi_setup() then restoring
the original value, the goal being just to run spi_setup() with the new
value - it's not really a good idea to change the maximum speed in the
first place.

> It leads to set a wrong max speed with IOCTL call.

In what way does it lead to the wrong speed being set?

> Fix the logic of a max speed assignment.

If the expectation is that the default speed should be changed for the
device this should be handled at the spidev level rather than in the
core.

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux