From: Han Xu <han.xu@xxxxxxx> Enable the runtime power management for lpspi module. Do some adaptation work from kernel 4.9 to 4.14. Signed-off-by: Clark Wang <xiaoning.wang@xxxxxxx> Signed-off-by: Han Xu <han.xu@xxxxxxx> Reviewed-by: Frank Li <frank.li@xxxxxxx> --- V2: - Fix the comment format. --- drivers/spi/spi-fsl-lpspi.c | 117 ++++++++++++++++++++++++++++-------- 1 file changed, 92 insertions(+), 25 deletions(-) diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c index f363c000d24a..84dcb9e176b8 100644 --- a/drivers/spi/spi-fsl-lpspi.c +++ b/drivers/spi/spi-fsl-lpspi.c @@ -16,7 +16,9 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/slab.h> #include <linux/spi/spi.h> #include <linux/spi/spi_bitbang.h> @@ -24,6 +26,8 @@ #define DRIVER_NAME "fsl_lpspi" +#define FSL_LPSPI_RPM_TIMEOUT 50 /* 50ms */ + /* i.MX7ULP LPSPI registers */ #define IMX7ULP_VERID 0x0 #define IMX7ULP_PARAM 0x4 @@ -154,13 +158,9 @@ static int lpspi_prepare_xfer_hardware(struct spi_controller *controller) spi_controller_get_devdata(controller); int ret; - ret = clk_prepare_enable(fsl_lpspi->clk_ipg); - if (ret) - return ret; - - ret = clk_prepare_enable(fsl_lpspi->clk_per); - if (ret) { - clk_disable_unprepare(fsl_lpspi->clk_ipg); + ret = pm_runtime_get_sync(fsl_lpspi->dev); + if (ret < 0) { + dev_err(fsl_lpspi->dev, "failed to enable clock\n"); return ret; } @@ -172,8 +172,8 @@ static int lpspi_unprepare_xfer_hardware(struct spi_controller *controller) struct fsl_lpspi_data *fsl_lpspi = spi_controller_get_devdata(controller); - clk_disable_unprepare(fsl_lpspi->clk_ipg); - clk_disable_unprepare(fsl_lpspi->clk_per); + pm_runtime_mark_last_busy(fsl_lpspi->dev); + pm_runtime_put_autosuspend(fsl_lpspi->dev); return 0; } @@ -480,6 +480,45 @@ static irqreturn_t fsl_lpspi_isr(int irq, void *dev_id) return IRQ_NONE; } +int fsl_lpspi_runtime_resume(struct device *dev) +{ + struct fsl_lpspi_data *fsl_lpspi = dev_get_drvdata(dev); + int ret; + + ret = clk_prepare_enable(fsl_lpspi->clk_per); + if (ret) + return ret; + + ret = clk_prepare_enable(fsl_lpspi->clk_ipg); + if (ret) { + clk_disable_unprepare(fsl_lpspi->clk_per); + return ret; + } + + return 0; +} + +int fsl_lpspi_runtime_suspend(struct device *dev) +{ + struct fsl_lpspi_data *fsl_lpspi = dev_get_drvdata(dev); + + clk_disable_unprepare(fsl_lpspi->clk_per); + clk_disable_unprepare(fsl_lpspi->clk_ipg); + + return 0; +} + +static int fsl_lpspi_init_rpm(struct fsl_lpspi_data *fsl_lpspi) +{ + struct device *dev = fsl_lpspi->dev; + + pm_runtime_enable(dev); + pm_runtime_set_autosuspend_delay(dev, FSL_LPSPI_RPM_TIMEOUT); + pm_runtime_use_autosuspend(dev); + + return 0; +} + static int fsl_lpspi_probe(struct platform_device *pdev) { struct fsl_lpspi_data *fsl_lpspi; @@ -505,6 +544,7 @@ static int fsl_lpspi_probe(struct platform_device *pdev) fsl_lpspi = spi_controller_get_devdata(controller); fsl_lpspi->dev = &pdev->dev; + dev_set_drvdata(&pdev->dev, fsl_lpspi); fsl_lpspi->is_slave = of_property_read_bool((&pdev->dev)->of_node, "spi-slave"); @@ -551,28 +591,21 @@ static int fsl_lpspi_probe(struct platform_device *pdev) goto out_controller_put; } - ret = clk_prepare_enable(fsl_lpspi->clk_ipg); - if (ret) { - dev_err(&pdev->dev, - "can't enable lpspi ipg clock, ret=%d\n", ret); + /* enable the clock */ + ret = fsl_lpspi_init_rpm(fsl_lpspi); + if (ret) goto out_controller_put; - } - ret = clk_prepare_enable(fsl_lpspi->clk_per); - if (ret) { - dev_err(&pdev->dev, - "can't enable lpspi per clock, ret=%d\n", ret); - clk_disable_unprepare(fsl_lpspi->clk_ipg); - goto out_controller_put; + ret = pm_runtime_get_sync(fsl_lpspi->dev); + if (ret < 0) { + dev_err(fsl_lpspi->dev, "failed to enable clock\n"); + return ret; } temp = readl(fsl_lpspi->base + IMX7ULP_PARAM); fsl_lpspi->txfifosize = 1 << (temp & 0x0f); fsl_lpspi->rxfifosize = 1 << ((temp >> 8) & 0x0f); - clk_disable_unprepare(fsl_lpspi->clk_per); - clk_disable_unprepare(fsl_lpspi->clk_ipg); - ret = devm_spi_register_controller(&pdev->dev, controller); if (ret < 0) { dev_err(&pdev->dev, "spi_register_controller error.\n"); @@ -593,16 +626,50 @@ static int fsl_lpspi_remove(struct platform_device *pdev) struct fsl_lpspi_data *fsl_lpspi = spi_controller_get_devdata(controller); - clk_disable_unprepare(fsl_lpspi->clk_per); - clk_disable_unprepare(fsl_lpspi->clk_ipg); + pm_runtime_disable(fsl_lpspi->dev); + + spi_master_put(controller); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int fsl_lpspi_suspend(struct device *dev) +{ + int ret; + + pinctrl_pm_select_sleep_state(dev); + ret = pm_runtime_force_suspend(dev); + return ret; +} + +static int fsl_lpspi_resume(struct device *dev) +{ + int ret; + + ret = pm_runtime_force_resume(dev); + if (ret) { + dev_err(dev, "Error in resume: %d\n", ret); + return ret; + } + + pinctrl_pm_select_default_state(dev); return 0; } +#endif /* CONFIG_PM_SLEEP */ + +static const struct dev_pm_ops fsl_lpspi_pm_ops = { + SET_RUNTIME_PM_OPS(fsl_lpspi_runtime_suspend, + fsl_lpspi_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(fsl_lpspi_suspend, fsl_lpspi_resume) +}; static struct platform_driver fsl_lpspi_driver = { .driver = { .name = DRIVER_NAME, .of_match_table = fsl_lpspi_dt_ids, + .pm = &fsl_lpspi_pm_ops, }, .probe = fsl_lpspi_probe, .remove = fsl_lpspi_remove, -- 2.17.1