[PATCH V2 4/8] spi: lpspi: add the error info of transfer speed setting

[Clark Wang <xiaoning.wang@xxxxxxx>]

Add a error info when set a speed which greater than half of per-clk of
spi module.

The minimum SCK period is 2 cycles(CCR[SCKDIV]). So the maximum transfer
speed is half of spi per-clk.

Signed-off-by: Clark Wang <xiaoning.wang@xxxxxxx>
---
V2:
 - No change. Resend for applying.
---
 drivers/spi/spi-fsl-lpspi.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index 84dcb9e176b8..69635cde0e22 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -255,6 +255,13 @@ static int fsl_lpspi_set_bitrate(struct fsl_lpspi_data *fsl_lpspi)
 	u8 prescale;
 
 	perclk_rate = clk_get_rate(fsl_lpspi->clk_per);
+
+	if (config.speed_hz > perclk_rate / 2) {
+		dev_err(fsl_lpspi->dev,
+		      "per-clk should be at least two times of transfer speed");
+		return -EINVAL;
+	}
+
 	for (prescale = 0; prescale < 8; prescale++) {
 		scldiv = perclk_rate /
 			 (clkdivs[prescale] * config.speed_hz) - 2;
@@ -304,7 +311,7 @@ static int fsl_lpspi_config(struct fsl_lpspi_data *fsl_lpspi)
 	return 0;
 }
 
-static void fsl_lpspi_setup_transfer(struct spi_device *spi,
+static int fsl_lpspi_setup_transfer(struct spi_device *spi,
 				     struct spi_transfer *t)
 {
 	struct fsl_lpspi_data *fsl_lpspi =
@@ -337,7 +344,7 @@ static void fsl_lpspi_setup_transfer(struct spi_device *spi,
 	else
 		fsl_lpspi->watermark = fsl_lpspi->txfifosize;
 
-	fsl_lpspi_config(fsl_lpspi);
+	return fsl_lpspi_config(fsl_lpspi);
 }
 
 static int fsl_lpspi_slave_abort(struct spi_controller *controller)
@@ -429,7 +436,10 @@ static int fsl_lpspi_transfer_one_msg(struct spi_controller *controller,
 	msg->actual_length = 0;
 
 	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
-		fsl_lpspi_setup_transfer(spi, xfer);
+		ret = fsl_lpspi_setup_transfer(spi, xfer);
+		if (ret < 0)
+			goto complete;
+
 		fsl_lpspi_set_cmd(fsl_lpspi, is_first_xfer);
 
 		is_first_xfer = false;
-- 
2.17.1