On 2/26/19 1:49 PM, Andy Shevchenko wrote:
Some masters may have different DMA burst size than hard coded default.
In such case respect the value given by DMA burst size provided via
platform data.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/spi/spi-pxa2xx-dma.c | 4 +++-
drivers/spi/spi-pxa2xx-pci.c | 5 ++++-
drivers/spi/spi-pxa2xx.c | 1 +
include/linux/spi/pxa2xx_spi.h | 1 +
4 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-pxa2xx-dma.c b/drivers/spi/spi-pxa2xx-dma.c
index 2fa7f4b43492..3343fff81c7b 100644
--- a/drivers/spi/spi-pxa2xx-dma.c
+++ b/drivers/spi/spi-pxa2xx-dma.c
@@ -239,13 +239,15 @@ int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip,
u32 *threshold)
{
struct pxa2xx_spi_chip *chip_info = spi->controller_data;
+ struct driver_data *drv_data = spi_controller_get_devdata(spi->controller);
+ u32 dma_burst_size = drv_data->master_info->dma_burst_size;
/*
* If the DMA burst size is given in chip_info we use that,
* otherwise we use the default. Also we use the default FIFO
* thresholds for now.
*/
- *burst_code = chip_info ? chip_info->dma_burst_size : 1;
+ *burst_code = chip_info ? chip_info->dma_burst_size : dma_burst_size;
*threshold = SSCR1_RxTresh(RX_THRESH_DFLT)
| SSCR1_TxTresh(TX_THRESH_DFLT);
diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c
index d3de925892cb..3faef7335137 100644
--- a/drivers/spi/spi-pxa2xx-pci.c
+++ b/drivers/spi/spi-pxa2xx-pci.c
@@ -5,7 +5,6 @@
*/
#include <linux/clk-provider.h>
#include <linux/module.h>
-#include <linux/of_device.h>
Minor note, no need to resend if ok to maintainers:
Unrelated change. Looks like already commit 0202775bc3a2
("spi/pxa2xx-pci: switch to use pcim_* interfaces") made this needless.
Otherwise looks ok to me.
--
Jarkko
